problem in large bandwidth management
Hi!
I have to manage the bandwitdh of a cable operator and share it.
They have a total bandwidth of 4Mb and 250 customers connected on this network.
They divided their bandwith in 3 category:
64kb => subnet 172.16.64.X
128k => subnet 172.16.128.X
256k => subnet 172.16.254.X
So I have to limit the bandwith of eith user:
64Kb for a user in the subnet 172.16.64.X
....
After reading the LARC HOWTO, i tried to make a script for sharing the bandwith.
The example 12.4 (Hashing filters for very fast massive filtering) correspond exactly to my problem but i'm not able to implement it, my script doesn't work, the bandwitdh is not share.:((
Can anyone can help me and tell me what is wrong in my script below? The only difference i see between my script and the example in the howto is:
- In my script i define the rules for ip dst
-In the howto they define the rules for ip src
Thank you very much for your help
The script:
tc qdisc del dev eth1 root
tc qdisc add dev eth1 root handle 1:0 cbq bandwidth 4Mbit avpkt 1000 cell 8
tc class add dev eth1 parent 1:0 classid 1:1 cbq bandwidth 64kbit \
rate 64kbit prio 5 allot 1514 weight 6kbit cell 8 maxburst 20 \
avpkt 1000 isolated
tc class add dev eth1 parent 1:0 classid 1:2 cbq bandwidth 128kbit \
rate 128kbit prio 5 allot 1514 weight 12kbit cell 8 maxburst 20 \
avpkt 1000 isolated
tc class add dev eth1 parent 1:0 classid 1:3 cbq bandwidth 256kbit \
rate 256kbit prio 5 allot 1514 weight 25kbit cell 8 maxburst 20 \
avpkt 1000 isolated
tc filter add dev eth1 parent 1:0 prio 5 protocol ip u32 tc filter add dev eth1 parent 1:0 prio 5 handle 2: u32 divisor 256
j=0;
while [ $j -le 255 ]; do
hex=echo "obase=16; $j" |bc
tc filter add dev eth1 protocol ip parent 1:0 prio 5 u32 ht 2:$hex: \
match ip dst 172.16.64.$j flowid 1:1
tc filter add dev eth1 protocol ip parent 1:0 prio 5 u32 ht 2:$hex: \
match ip dst 172.16.128.$j flowid 1:2
tc filter add dev eth1 protocol ip parent 1:0 prio 5 u32 ht 2:$hex: \
match ip dst 172.16.254.$j flowid 1:3
j=$((j+1))
done
tc filter add dev eth1 protocol ip parent 1:2 prio 5 u32 ht 800:: \
match ip dst 172.16.0.0/16 \
hashkey mask 0x000000ff at 12 \
link 2:
Michael Richez.
Quoted 26 lines · hotmail
Hi!
I have to manage the bandwitdh of a cable operator and share it.
They have a total bandwidth of 4Mb and 250 customers connected on this network.
They divided their bandwith in 3 category:
64kb => subnet 172.16.64.X
128k => subnet 172.16.128.X
256k => subnet 172.16.254.XSo I have to limit the bandwith of eith user:
64Kb for a user in the subnet 172.16.64.X
....After reading the LARC HOWTO, i tried to make a script for sharing the bandwith. The example 12.4 (Hashing filters for very fast massive filtering) correspond exactly to my problem but i'm not able to implement it, my script doesn't work, the bandwitdh is not share.:((
Can anyone can help me and tell me what is wrong in my script below? The only difference i see between my script and the example in the howto is:
Quoted 5 lines
- In my script i define the rules for ip dst
-In the howto they define the rules for ip srcThank you very much for your help
Some remarks.
- Bandwidth is the real link bandwidth. So if you have a 100mbit link, it's 100mbit.
- Remove all the isolated parameters. It's not working and it can disturb the cbq setup.
- Create 1 bounded root class with rate = link bandwidth and attach all other classes (1,2 and 3 in your case) to that class.
- Try htb if you can (kernel 2.4.20 has htb support, for older kernels, you need a patch).
Maybe the docs on www.docum.org can help.
Quoted 38 lines
The script:
tc qdisc del dev eth1 root
tc qdisc add dev eth1 root handle 1:0 cbq bandwidth 4Mbit avpkt 1000 cell 8
tc class add dev eth1 parent 1:0 classid 1:1 cbq bandwidth 64kbit \
rate 64kbit prio 5 allot 1514 weight 6kbit cell 8 maxburst 20 \
avpkt 1000 isolatedtc class add dev eth1 parent 1:0 classid 1:2 cbq bandwidth 128kbit \
rate 128kbit prio 5 allot 1514 weight 12kbit cell 8 maxburst 20 \
avpkt 1000 isolatedtc class add dev eth1 parent 1:0 classid 1:3 cbq bandwidth 256kbit \
rate 256kbit prio 5 allot 1514 weight 25kbit cell 8 maxburst 20 \
avpkt 1000 isolatedtc filter add dev eth1 parent 1:0 prio 5 protocol ip u32 tc filter add dev eth1 parent 1:0 prio 5 handle 2: u32 divisor 256
j=0;
while [ $j -le 255 ]; do
hex=echo "obase; $j" |bc
tc filter add dev eth1 protocol ip parent 1:0 prio 5 u32 ht 2:$hex: \
match ip dst 172.16.64.$j flowid 1:1
tc filter add dev eth1 protocol ip parent 1:0 prio 5 u32 ht 2:$hex: \
match ip dst 172.16.128.$j flowid 1:2
tc filter add dev eth1 protocol ip parent 1:0 prio 5 u32 ht 2:$hex: \
match ip dst 172.16.254.$j flowid 1:3
j=$((j+1))
donetc filter add dev eth1 protocol ip parent 1:2 prio 5 u32 ht 800:: \
match ip dst 172.16.0.0/16 \
hashkey mask0x000000ffat 12 \
link 2:
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/