Skip to contentSkip to conversation

modifying ethernet header dst mac with ebtables?

LARTC Victor Cassar 3 participants 4 messages Apr 4, 2003 – Apr 8, 2003

lore
Share & tools
lore
#0 lore raw

Hi,

I´m working in a briding enviroment and i want to be sure that my arp requests outgoing a bridge interface will be hear by only one specific device (because of security reason)

are there any way to re-write the ff:ff:ff:ff:ff:ff on this arp request so they appears like a unicast?

Do de ip stack understand this "unicast" arp request?

Thanks in advance for your help
Victor

__________________________________________________
Do you Yahoo!?
Yahoo! Tax Center - File online, calculators, forms, and more
http://tax.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

Victor,

: I´m working in a briding enviroment and i want to be sure that my arp : requests outgoing a bridge interface will be hear by only one specific : device (because of security reason)

Strange need! Sounds interesting.

: are there any way to re-write the ff:ff:ff:ff:ff:ff on this arp request : so they appears like a unicast?

I imagine that Julian will jump in here and reply to you, but I thought I'd point you to ip arp, an add-on tool Julian has written for iproute2.

http://www.ssi.bg/~ja/#iparp

: Do de ip stack understand this "unicast" arp request?

Er...um...I don't know. Good question.

-Martin

Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Victor Cassar

Hello,

Quoted 3 lines · Martin A. Brown

: I´m working in a briding enviroment and i want to be sure that my arp : requests outgoing a bridge interface will be hear by only one specific : device (because of security reason)

Victor, what about trying something similar to the example
in the ebtables docs:

ebtables -t nat -A PREROUTING -d ff:ff:ff:ff:ff:ff -i eth0 -j dnat --to-destination 54:44:33:22:11:00

Quoted 7 lines

: are there any way to re-write the ff:ff:ff:ff:ff:ff on this arp request : so they appears like a unicast?

I imagine that Julian will jump in here and reply to you, but I thought I'd point you to ip arp, an add-on tool Julian has written for iproute2.

http://www.ssi.bg/~ja/#iparp

iparp can not see these packets (layer 2) but for other
purposes probes can be originated with unicast dst MAC in this way:

ip arp add table output to 1.2.3.4 lldst 00:11:22:33:44:55

Quoted 1 line

: Do de ip stack understand this "unicast" arp request?

Yes but at MAC level the ARP code cares only for
unicast/broadcast, no matter the actual dst MAC of the received packet.

Regards

--
Julian Anastasov <[email protected]>

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to Victor Cassar

Julian , Martin

I´ve succesfully tested the ebtables experiment doing dnat and writing specific mac instead of all FF´s to the arp querys

it works fine

if some one want see the small cap file is available at

http://megaserv.homeip.net/arp.cap

regards

and thanks again for your help

Quoted 45 lines · --- Julian Anastasov

Hello,

Quoted 1 line · Martin A. Brown

: I´m working in a briding enviroment and i want

to be sure that my arp

Quoted 1 line

: requests outgoing a bridge interface will be

hear by only one specific

Quoted 1 line

: device (because of security reason)

Victor, what about trying something similar to the
example
in the ebtables docs:

ebtables -t nat -A PREROUTING -d ff:ff:ff:ff:ff:ff -i eth0 -j dnat --to-destination 54:44:33:22:11:00

Quoted 1 line

: are there any way to re-write the

ff:ff:ff:ff:ff:ff on this arp request

Quoted 3 lines

: so they appears like a unicast?

I imagine that Julian will jump in here and reply

to you, but I thought

Quoted 1 line

I'd point you to ip arp, an add-on tool Julian has

written for iproute2.

Quoted 2 lines

http://www.ssi.bg/~ja/#iparp

iparp can not see these packets (layer 2) but for
other
purposes probes can be originated with unicast dst MAC in this way:

ip arp add table output to 1.2.3.4 lldst
00:11:22:33:44:55

Quoted 1 line

: Do de ip stack understand this "unicast" arp

request?

Yes but at MAC level the ARP code cares only for
unicast/broadcast, no matter the actual dst MAC of the received
packet.

Quoted 8 lines

Regards

--
Julian Anastasov <[email protected]>

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:

http://lartc.org/

__________________________________________________
Do you Yahoo!?
Yahoo! Tax Center - File online, calculators, forms, and more
http://tax.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/