cbq scrpit
hi all
i have a script but i guess it is not limiting the bandwidth. why is this plz let me know.
i want this to limit my uplink to 64kbps...
-----------
tc qdisc add dev eth0 root handle 1: cbq avpkt 1000 bandwidth 10mbit
tc class add dev eth0 parent 1: classid 1:1 cbq rate 64kbit allot 1514 prio 3 bounded isolated
tc filter add dev eth0 parent 1: protocol ip prio 16 u32 match ip dst x.x.x.0/24 flowid 1:1
----------
Thanks
Paras pradhan
Systems Dept.
Bajranet PVT LTD
Kathmandu
Nepal.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 6 lines · Paras pradhan
hi all
i have a script but i guess it is not limiting the bandwidth. why is this plz let me know.
i want this to limit my uplink to 64kbps...
Remove the isolated parameter and "bandwidth 10Mbit".
Corrected commands :
-----------
tc qdisc add dev eth0 root handle 1: cbq avpkt 1000 bandwidth 10mbit
tc class add dev eth0 parent 1: classid 1:1 cbq rate 64kbit bandwidth 10mbit allot 1514 prio 3 bounded
tc filter add dev eth0 parent 1: protocol ip prio 16 u32 match ip dst x.x.x.0/24 flowid 1:1
----------
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/