dynamic rate (depending on other rate) in htb classes?
Hi!
Is it possible to have a dynamic rate in a htb class?
In other words: Class B's rate should always be x times the _current_ rate of class A. Ceiling rates should apply nevertheless though.
e.g.: Class A: rate 500 kbit, ceil 2000 kbit
Class B: rate 0.25 * (current rate of class A), ceil 1000 kbit
Regards, Walter
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 3 lines · Walter Haidinger
Hi!
Is it possible to have a dynamic rate in a htb class?
No.
Quoted 5 lines
In other words: Class B's rate should always be x times the _current_ rate of class A. Ceiling rates should apply nevertheless though.
e.g.: Class A: rate 500 kbit, ceil 2000 kbit
Class B: rate 0.25 * (current rate of class A), ceil 1000 kbit
You can only do this with external scripting.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/