Tcng and wondershaper
Hey,
Has anybody converted the wondershaper to tcng? I'm very interessed in it and would like to see how it's done.
Thanks,
Wouter
Wouter,
: Has anybody converted the wondershaper to tcng? I'm very interessed in : it and would like to see how it's done.
I would love to do this--I simply haven't made the time to do so yet. I would imagine somebody will beat me to it, but if not, I'll have my variant available at some point in the future, and I'll remember to post a note here to let people know it's available.
Have you thought of trying to make it yourself?
If you want a few basic examples of tcng, there are a dozen or so simple examples in the ./examples-ng directory from the tcng distribution, and there are many syntactic elements in the ./tests directory. You can look at my commented examples in my tcng/htb HOWTO [1], and the tcng manual [2].
Since the wondershaper is so well-documented (rationale and approach), you should be able to create something similar with tcng.
Ciao for now,
-Martin
[1] http://tldp.org/HOWTO/Traffic-Control-tcng-HTB-HOWTO/
[2] http://linux-ip.net/gl/tcng/
Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 10 lines
Wouter,
: Has anybody converted the wondershaper to tcng? I'm very interessed in : it and would like to see how it's done.
I would love to do this--I simply haven't made the time to do so yet. I would imagine somebody will beat me to it, but if not, I'll have my variant available at some point in the future, and I'll remember to post a note here to let people know it's available.
Here is a first untested draft of wshaper_tcng.htb:
- Jacob
#!/bin/bash
# Wonder Shaper
# please read the README before filling out these values # # Set the following values to somewhat less than your actual download # and uplink speed.
#Set the device that is to be shaped.
DEV=ppp0
# Set uplink, downlink and worse fate claasifier. Search for downlink, uplink and worse_fate.
#Now remove the following two lines :-)
echo Please read the documentation in 'README' first exit
if [ "$1" = "status" ]
then
tc -s qdisc ls dev $DEV
tc -s class ls dev $DEV
exit
fi
# clean existing down- and uplink qdiscs, hide errors tc qdisc del dev $DEV root 2> /dev/null > /dev/null tc qdisc del dev $DEV ingress 2> /dev/null > /dev/null
if [ "$1" = "stop" ]
then
exit
fi
tcc -Xp,-DDEVICE=$DEV <<EOF | /bin/bash -v
// Set the following values to somewhat less than your actual download and uplink speed.
\$downlink = 800 kbps;
\$uplink = 220 kbps;
// some traffic however suffers a worse fate
\$worse_fate = 1;
/*
\$worse_fate (ip_src != 1.1.1.1 && ip_src:24 = 1.1.1.0 && ip_dst:24 = 2.2.2.0 &&
tcp_sport = PORT_SSH) ||
ip_tos != 0x10 || tcp_dport >= 2000;
!!!!!!! Do NOT use ip_src = 1.1.1.0/24 or ip_src:24 = 1.1.1.1 !!!!!!!
*/
#define xstr(s) str(s)
#define str(s) #s
dev xstr(DEVICE) {
ingress {
\$all_pol = SLB(cir \$downlink, cbs 10 kB);
class (<>) if SLB_ok(\$all_pol);
drop if 1;
}
egress {
class (<\$interactive>) if // ICMP (ip protocol 1) in the interactive so we
// can do measurements & impress our friends:
ip_proto = IPPROTO_ICMP ||
// TOS Minimum Delay (ssh, NOT scp) :
ip_tos = 0x10 ||
// To speed up downloads while an upload is going on, put ACK packets in
// the interactive class:
(tcp_ACK && ip_len < 64);
// some traffic however suffers a worse fate
class (<\$worse_fate_class>) if \$worse_fate;// bulk & default class
class (<\$bulk>) if 1;
htb () {
class (rate \$uplink, burst 6kB) {
\$interactive = class (prio 1 ,rate \$uplink) {sfq (perturb 10 sec);};
\$bulk = class (prio 2, rate 0.9 *\$uplink) {sfq(perturb 10 sec);};
\$worse_fate_class = class (prio 3, rate 0.8 *\$uplink) {sfq(perturb 10 sec);};
}
}
}
}EOF
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/