Influence the route
Need some advise on how a route can be influenced at the customer premise end.
Assuming I have a ADSL connection to the internet with static IP, ie
IP for ADSL modem: 210.1.2.85
IP for customer premise: 210.1.2.86 ( Linux ) Default GW for the Linux is configured as the ADSL modem.
However, due to whatever reason, we could like to take an alternative route for certain destinations, so we add ( besides default route ) :-
route add -host 202.1.2.38 gw 210.48.1.7
However, we found, based on limited information I have, this route never take effect.
Is it because the route has been overwritten by the ADSL modem once the packet has been routed through it ?
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/