Using filters without a handle
Quoted 29 lines · Stef Coene
Quoted 10 lines · Paul Evans
Hi Stef,
You mean instead of a zillion of these:
$tc filter add dev $extif parent 1:0 protocol ip handle $var fw flowid 1:$varIt's just one of:
$tc filter add dev $extif parent 1:0 protocol ip fw ?I see it doesn't error, but I haven't tried it on the real thing yet.
It works. If you add that filter, packets with mark 11 will end in class 1:11. Actually you use a bery fast hash key so you don't need to check all the filters.
But be aware. Mark and classid is in hex. So somtimes 10 is translated in to A. So it's better to specify0x10for the mark so you are sure it's in hex.Quoted 2 lines
Also, could I then add further filters *with* options and would they be honored? It'd be very cool if so.
Yes. You can iuse the fw filter to put the packets in a class. And you can add extra filters to that class to classify the packets in sub classes : 1:0
1:11:10 1:11
Quoted 7 lines
$tc filter add dev $extif parent 1:0 protocol ip handle $var fw $tc filter add dev $extif parent 1:10 blabla flowid 1:10 $tc filter add dev $extif parent 1:11 blabla flowid 1:11
I know it can be done, but I never checked it my self. So if it works, let me know :) And if it works, I create an extra fas and update the howto. Stef
When I tried it for real:
RTNETLINK answers: Invalid argument
Used the line just as I suggested above.
Signature · 6 lines
Regards, Paul Evans _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 4 lines
When I tried it for real:
RTNETLINK answers: Invalid argumentUsed the line just as I suggested above.
tc filter add dev eth0 parent 10: protocol ip fw
works for me.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 7 lines · Stef Coene
Quoted 4 lines
When I tried it for real:
RTNETLINK answers: Invalid argumentUsed the line just as I suggested above.
tc filter add dev eth0 parent 10: protocol ip fw
works for me.
Worked fine in my shell on my own box too (where nothing is happening or configed) until I changed the script on the backup router and got that.
The script on the router is just a bunch of loops creating leaf classes for different kinds of client machines. I commented the filter line out of each loop and added the line from our last mail at the end and got that error.
Maybe I had finger problems. could be. I'll give it another go a little later on. I'm accumulating some numbers right now and don't want to reset the counters again just yet. Be nice if I could nuke hundreds of filter entries at one go.
oh yeah :-) also, I should go through your site again if you want sometime. Today I'm going to attack rrdtools with python so I'm looking forward to that later on.
Signature · 6 lines
Regards, Paul Evans _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/