Configuration of CBQ
All,
I plan to config my network by using CBQ (Attached the configuration files). I want to do a packet prioritization instead traffic shaping (perhaps in the future I will need it).
The result that I want :
1. HTTP gets the 1st priority
2. SMTP and some other packet get the 2nd
3. FTP gets the 3rd
Should I configure the "priority default"? (I did it in Cisco router, last time)
Your answer is very appreciated. Many thanks for your help.
Rgds,
Awie
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Sorry to forget informing that I used CBQ.init
Thx & Rgds,
Awie
----- Original Message -----
From: "Awie" <[email protected]>
To: <[email protected]>
Sent: Sunday, April 27, 2003 10:52 PM
Subject: [LARTC] Configuration of CBQ
Quoted 3 lines
All,
I plan to config my network by using CBQ (Attached the configuration
files).
Quoted 1 line
I want to do a packet prioritization instead traffic shaping (perhaps in
the
Quoted 15 lines
future I will need it).
The result that I want :
1. HTTP gets the 1st priority
2. SMTP and some other packet get the 2nd
3. FTP gets the 3rdShould I configure the "priority default"? (I did it in Cisco router, last time)
Your answer is very appreciated. Many thanks for your help.
Rgds,
Quoted 8 lines
Awie
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 8 lines · Awie
All,
I plan to config my network by using CBQ (Attached the configuration files). I want to do a packet prioritization instead traffic shaping (perhaps in the future I will need it).
The result that I want :
Quoted 8 lines
1. HTTP gets the 1st priority
2. SMTP and some other packet get the 2nd
3. FTP gets the 3rdShould I configure the "priority default"? (I did it in Cisco router, last time)
Your answer is very appreciated. Many thanks for your help.
What do you mean with priority?? Do you mean that all HTTP traffic should be send first? If you do, then you a big download can kill all FTP or SMTP traffic. To prevent this, you have to shape the traffic.
Isn't it better to say that http can always use at least 60% of the link? If there is no other traffic, HTTP can use 100%. Ftp can use 100% traffic, but of there is other traffic, it will fal back to 10.
So something like this:
HTTP : 60 %
SMTP : 30 %
FTP : 10 %
Traffic that can use a higher priority is real-time traffic like telnet, ssh or traffic that needs low delays like ACK.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Stef,
Thanks for your advise, it should be a better idea than mine.
Anyway, how can I make that config? Here I attach my config, but I think it is still not a correct one.
Thx & Rgds,
Awie
----- Original Message -----
From: "Stef Coene" <[email protected]>
To: "Awie" <[email protected]>; <[email protected]>
Sent: Sunday, April 27, 2003 11:25 PM
Subject: Re: [LARTC] Configuration of CBQ
Quoted 7 lines · Awie
Quoted 6 lines
All,
I plan to config my network by using CBQ (Attached the configuration files). I want to do a packet prioritization instead traffic shaping (perhaps in the future I will need it).
Quoted 7 lines
Quoted 7 lines
The result that I want :
1. HTTP gets the 1st priority
2. SMTP and some other packet get the 2nd
3. FTP gets the 3rdShould I configure the "priority default"? (I did it in Cisco router,
last
Quoted 4 lines
Quoted 3 lines
time)
Your answer is very appreciated. Many thanks for your help.
What do you mean with priority?? Do you mean that all HTTP traffic should
be
Quoted 4 lines
send first? If you do, then you a big download can kill all FTP or SMTP traffic. To prevent this, you have to shape the traffic.
Isn't it better to say that http can always use at least 60% of the link?
If
Quoted 1 line
there is no other traffic, HTTP can use 100%. Ftp can use 100% traffic,
but
Quoted 8 lines
of there is other traffic, it will fal back to 10.
So something like this:
HTTP : 60 %
SMTP : 30 %
FTP : 10 %Traffic that can use a higher priority is real-time traffic like telnet,
ssh
Quoted 15 lines
or traffic that needs low delays like ACK.
Stef
--
[email protected]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/