cascaded HTB urgent question
Hi there,
I have a question with regards to cascading multiple HTB qdiscs. Assume that I want to build the following hierarchy:
(qdisc htb 1:0) -> (class htb 1:1) -> (qdisc htb 2:0) -> (class htb 2:1)
-> (class htb 2:2)
I want to attache aggregate u32 filters at 1:0 for supernets, then at 2:0 (and 3:0, 4:0, etc), I attach the more specific u32 filters for say HTTP and SMPT shaping.
so I attach the following filters:
tc filter add dev eth0 parent 1:0 protocol ip u32 match ip dst
172.16.1.0/24 classid 1:1 so that all the class c traffic is directed to 1:1 then for that c class web traffic tc filter add dev eth0 parent 2:0 protocol ip u32 match ip sport 80 0xffff classid 2:1 then for that c class smtp traffic tc filter add dev eth0 parent 2:0 protocol ip u32 match ip sport 25 0xffff classid 2:2
and so on and so forth
however, when I build that setup, the c class traffic gets directed to 1:1 alright, but nothing goes nay further in 2:1 and 2:2
my reasoning could be one of the following:
1) you cannot cascade HTB qdiscs, which to me is illogical, it defies the concept and adventages of having a hierarchical setup.
2) there is something wrong with the way I attached the filters.
3) I totally misunderstood HTB!
Please advise.
Thanks a million.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 32 lines · On 28 Apr 2003 11:50:46 +0300 Osama Abu Elsorour <[email protected]> wrote:
Hi there,
I have a question with regards to cascading multiple HTB qdiscs. Assume that I want to build the following hierarchy:(qdisc htb 1:0) -> (class htb 1:1) -> (qdisc htb 2:0) -> (class htb 2:1)
-> (class htb 2:2)I want to attache aggregate u32 filters at 1:0 for supernets, then at 2:0 (and 3:0, 4:0, etc), I attach the more specific u32 filters for say HTTP and SMPT shaping.
so I attach the following filters:
tc filter add dev eth0 parent 1:0 protocol ip u32 match ip dst172.16.1.0/24 classid 1:1 so that all the class c traffic is directed to 1:1 then for that c class web traffic tc filter add dev eth0 parent 2:0 protocol ip u32 match ip sport 80 0xffff classid 2:1 then for that c class smtp traffic tc filter add dev eth0 parent 2:0 protocol ip u32 match ip sport 25 0xffff classid 2:2and so on and so forth
however, when I build that setup, the c class traffic gets directed to 1:1 alright, but nothing goes nay further in 2:1 and 2:2
my reasoning could be one of the following:
1) you cannot cascade HTB qdiscs, which to me is illogical, it defies the concept and adventages of having a hierarchical setup.
2) there is something wrong with the way I attached the filters.
3) I totally misunderstood HTB!
Quoted 4 lines
Please advise.
Thanks a million.
AFAIK filters can be atached ONLY to leaf classes (2.1 and 2.1)
Signature · 8 lines
Sheshka Aleksey Senior Security Administrator PGP key : http://pgp.dtype.org:11371/pks/lookup?op=get&search=0x0BE90515 _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
You should be able to cascade these ... I did something similar awhile ago with htb.init cause the various tc commands involved confused me :) You can grab the script at:: http://sourceforge.net/projects/htbinit
However you can avoid htb.init if you want ... IIRC, there's an example of using HTB in a hierachy at:
http://luxik.cdi.cz/~devik/qos/htb/manual/userg.htm
Perhaps the problem is that the classids of 2:* cannot be children of class 1:1? I dunno -- that is conjecture ... read the docs instead of listening to my late-night theories :)
good luck,
-rob
Quoted 34 lines · Osama Abu Elsorour
Hi there,
I have a question with regards to cascading multiple HTB qdiscs. Assume that I want to build the following hierarchy:(qdisc htb 1:0) -> (class htb 1:1) -> (qdisc htb 2:0) -> (class htb 2:1)
-> (class htb 2:2)I want to attache aggregate u32 filters at 1:0 for supernets, then at 2:0 (and 3:0, 4:0, etc), I attach the more specific u32 filters for say HTTP and SMPT shaping.
so I attach the following filters:
tc filter add dev eth0 parent 1:0 protocol ip u32 match ip dst172.16.1.0/24 classid 1:1 so that all the class c traffic is directed to 1:1 then for that c class web traffic tc filter add dev eth0 parent 2:0 protocol ip u32 match ip sport 80 0xffff classid 2:1 then for that c class smtp traffic tc filter add dev eth0 parent 2:0 protocol ip u32 match ip sport 25 0xffff classid 2:2and so on and so forth
however, when I build that setup, the c class traffic gets directed to 1:1 alright, but nothing goes nay further in 2:1 and 2:2
my reasoning could be one of the following:
1) you cannot cascade HTB qdiscs, which to me is illogical, it defies the concept and adventages of having a hierarchical setup.
2) there is something wrong with the way I attached the filters.
3) I totally misunderstood HTB!Please advise.
Quoted 7 lines
Thanks a million.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/