Eureka!
I finally figured out what in emule was ruining my network.
I tried everything and nothing worked. I was always getting timeouts. Until i went into the extended settings in emule and changed connections per 5 seconds to 5 from the default of 20. Miracle. It now works great.
So apparently lots of connection attempts in a few seconds is an effective way of starving all other machines behind a linux gateway even if you're using SFQ.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 9 lines · Ricardo Jorge da Fonseca Marques Ferreira
I finally figured out what in emule was ruining my network.
I tried everything and nothing worked. I was always getting timeouts. Until i went into the extended settings in emule and changed connections per 5 seconds to 5 from the default of 20. Miracle. It now works great.
So apparently lots of connection attempts in a few seconds is an effective way of starving all other machines behind a linux gateway even if you're using SFQ.
Mhh. I wonder how this can be. Some tcp connection specialists out here? Is it so that after a long time the connections are fair distributed or is there always a starvation of the other connections?
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 2 lines
On Monday 28 April 2003 00:20, Ricardo Jorge da
Fonseca Marques Ferreira
Quoted 2 lines
Quoted 1 line · wrote:
I finally figured out what in emule was ruining my
network.
Quoted 2 lines
Quoted 2 lines
I tried everything and nothing worked. I was always
getting timeouts. Until
Quoted 1 line
Quoted 1 line
i went into the extended settings in emule and
changed connections per 5
Quoted 1 line
Quoted 1 line
seconds to 5 from the default of 20. Miracle. It
now works great.
Quoted 2 lines
Quoted 2 lines
So apparently lots of connection attempts in a few
seconds is an effective
Quoted 1 line
Quoted 1 line
way of starving all other machines behind a linux
gateway even if you're
Quoted 2 lines
Quoted 1 line
using SFQ.
Mhh. I wonder how this can be. Some tcp connection
specialists out here?
Quoted 1 line
Is it so that after a long time the connections are
fair distributed or is
Quoted 3 lines
there always a starvation of the other connections?
Stef
It could be because SFQ only equalizes flows. If you open lots of connections then, it means every connection will get worse. If this is the problem, this will not happen with ESFQ, afaik.
---
John Bäckstrand
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 9 lines · Stef Coene
On Monday 28 April 2003 00:20, Ricardo Jorge da Fonseca Marques Ferreira
Quoted 6 lines · wrote:
I finally figured out what in emule was ruining my network.
I tried everything and nothing worked. I was always getting timeouts. Until i went into the extended settings in emule and changed connections per 5 seconds to 5 from the default of 20. Miracle. It now works great.
Quoted 7 lines
Quoted 3 lines
So apparently lots of connection attempts in a few seconds is an effective way of starving all other machines behind a linux gateway even if you're using SFQ.
Mhh. I wonder how this can be. Some tcp connection specialists out here? Is it so that after a long time the connections are fair distributed or is there always a starvation of the other connections?
In my experience the connections never get fairly distributed. I can reproduce this just increasing the number of connections per 5 seconds to 20 again. The effect is imediate.
I get connection timeouts in HTTP (more apparent, i'm sure other protocols suffer too) and have to reload a series of times before the connection "goes" and even then it then fails for some other elements in the page.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 4 lines · John Bäckstrand
It could be because SFQ only equalizes flows. If you open lots of connections then, it means every connection will get worse. If this is the problem, this will not happen with ESFQ, afaik.
Hmm, is there any info on the web about ESFQ & can it be used with tcng which is what i'm using now to generate my tc scripts ?
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/