dsmark, unkown
Hi,
I want to use the dsmark, but it always says: "unkown qdisc", although I have enabled it (y in Network options), and I have my kernel recompiled.
I am using SuSE 8.1, 2.4.20 Kernel, tc available at the HTB site (with already precompiled HTB queue).
Can anybody find the problem?
thx
_________________________________________________________________
MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*.
http://join.msn.com/?pageþatures/virus
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hello there,
: I want to use the dsmark, but it always says: "unkown qdisc", although I : have enabled it (y in Network options), and I have my kernel recompiled.
Not only must the kernel support diffserv/dsmark, but so must your iproute2 distribution.
: I am using SuSE 8.1, 2.4.20 Kernel, tc available at the HTB site (with : already precompiled HTB queue).
Try recompiling iproute2 after setting TC_CONFIG_DIFFSERV=y.
If you like RPMs, you can always try building my RPM (written for RH, not SuSE).
http://linux-ip.net/traffic-control/iproute-2.4.7-7.src.rpm *
-Martin
* Note, this includes the HTB patch for tc as well as compiling with diffserv support. There is no warranty express or implied.
Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 8 lines · On Wednesday 07 May 2003 18:34, sun reflex4 wrote:
Hi,
I want to use the dsmark, but it always says: "unkown qdisc", although I have enabled it (y in Network options), and I have my kernel recompiled.I am using SuSE 8.1, 2.4.20 Kernel, tc available at the HTB site (with already precompiled HTB queue).
Can anybody find the problem?
You have to enable Diffserv support in iproute2.
Look at http://diffserv.sourceforge.net/ in iproute2 section.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
thanx for the help, it was bec. of the tc, i downloaded the source and "make"ed it. But the old one I had supports the HTB, whereas the new binary doesn't support it (but dsmark already), is it a problem when I use both (one called tc & the other tc_new)?
Quoted 26 lines
From: "Martin A. Brown" <[email protected]>
To: sun reflex4 <[email protected]>
CC: [email protected]
Subject: Re: [LARTC] dsmark, unkown
Date: Wed, 7 May 2003 12:50:58 -0500 (CDT)Hello there,
: I want to use the dsmark, but it always says: "unkown qdisc", although
I
: have enabled it (y in Network options), and I have my kernel
recompiled.Not only must the kernel support diffserv/dsmark, but so must your iproute2 distribution.
: I am using SuSE 8.1, 2.4.20 Kernel, tc available at the HTB site (with : already precompiled HTB queue).
Try recompiling iproute2 after setting TC_CONFIG_DIFFSERV=y.
If you like RPMs, you can always try building my RPM (written for RH, not SuSE).
http://linux-ip.net/traffic-control/iproute-2.4.7-7.src.rpm *
Quoted 8 lines
-Martin
* Note, this includes the HTB patch for tc as well as compiling with diffserv support. There is no warranty express or implied.
--
Martin A. Brown --- SecurePipe, Inc. --- [email protected]
_________________________________________________________________
Protect your PC - get McAfee.com VirusScan Online
http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid963
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Well,
: thanx for the help, it was bec. of the tc, i downloaded the source and : "make"ed it. But the old one I had supports the HTB, whereas the new : binary doesn't support it (but dsmark already), is it a problem when I : use both (one called tc & the other tc_new)?
I don't really know whether that's advisable or not. I do not know of any problem this can cause, but why not try applying the htb patch [1]? It's not so hard, and then you have a single binary to call instead of two different binaries.
Maybe somebody else can answer your question about potential problems of using multiple tc binaries. Frankly, I think it's probably mostly confusing for the human.
-Martin
[1] http://luxik.cdi.cz/~devik/qos/htb/v3/htb3.6-020525.tgz
Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/