Skip to contentSkip to conversation

Where Does 'ip monitor all' output go?

LARTC Carol Anne Ogdin 2 participants 3 messages May 8, 2003 – May 9, 2003

lore
Share & tools
lore
#1 lore raw

Hi

Quoted 2 lines · Carol Anne Ogdin

Issue "ip monitor all". Watch nothing happen on the screen. Where does the output of monitor go?

It goes to standard out. The output are for example route changes (try on one console ip monitor and on another ip route add/del and you will see). You can monitor the state of devices,addresses and routes with "ip monitor"...

It is not some sort of network monitor like tcpdump or somesuch.

MfG/Regards, Alexander

Signature · 5 lines
Alexander Reelsen   http://tretmine.org
[email protected]
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Carol Anne Ogdin
Quoted 6 lines · Alexander Reelsen
Quoted 2 lines

Issue "ip monitor all". Watch nothing happen on the screen. Where does the output of monitor go?

It goes to standard out. The output are for example route changes (try on one console ip monitor and on another ip route add/del and you will see). You can monitor the state of devices,addresses and routes with "ip monitor"...

Thanks, Alexander. Just the explanation I needed. It makes sense, now.

--Carol Anne

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/