3 point bridge with dropping packets from particular source addies
(I have mirroed this question locally to the bridge mailing list also) ok heres the setup
ROUTER
| |(public) |
bridge --priv-- NAT
|
|
Clients
clients have 4 possbile addresses
192.168.33.0
192.168.34.0
and
public
1.2.3.x
4.5.6.x
I want to only allow the 192.168.. addy to go to the priv interface and same 4 the public only out the public interface
so could i just say in my iptables
source address: 1.2.3.x or 4.5.6., out interface: NAT, jump DROP on the output table
and
source address: 192.168.33.x and 192.168.34.x out interface: public, DROP on the output table
would that cuase any funky issues?
my book says no because as i understand a bridge it just mirrors all traffic to another interface correct?
Chris K Ellsworth
Chris K Ellsworth
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/