what's wrong with the last line ?
tc qdisc del dev eth1 root
tc qdisc add dev eth1 root handle 10: prio bands 6 tc qdisc add dev eth1 parent 10:1 handle 20: bfifo tc qdisc add dev eth1 parent 10:2 handle 30: bfifo tc qdisc add dev eth1 parent 10:3 handle 40: bfifo tc qdisc add dev eth1 parent 10:4 handle 50: bfifo tc qdisc add dev eth1 parent 10:5 handle 60: bfifo tc qdisc add dev eth1 parent 10:6 handle 70: bfifo
# www traffic
tc filter add dev eth1 parent 10: protocol ip prio 1 u32 match ip dport 80 0xff flowid 10:1
# pop3 traffic tc filter add dev eth1 parent 10: protocol ip prio 1 u32 match ip dport 110 0xff flowid 10:1 # smtp traffic tc filter add dev eth1 parent 10: protocol ip prio 1 u32 match ip dport 25 0xff flowid 10:1
# BANDA 2
# 2234 , 5534 -slsk
tc filter add dev eth1 parent 10: protocol ip prio 2 u32 match ip dport 2234 0xff flowid 10:2 tc filter add dev eth1 parent 10: protocol ip prio 2 u32 match ip dport 5534 0xff flowid 10:2 tc filter add dev eth1 parent 10: protocol ip prio 2 u32 match ip sport 2234 0xff flowid 10:2 tc filter add dev eth1 parent 10: protocol ip prio 2 u32 match ip sport 5534 0xff flowid 10:2
# BANDA 3
# yahoo messanger tc filter add dev eth1 parent 10: protocol ip prio 3 u32 match ip dst 216.136.224.0/24 flowid 10:3 # msn tc filter add dev eth1 parent 10: protocol ip prio 3 u32 match ip dst 207.46.104.20 flowid 10:3 tc filter add dev eth1 parent 10: protocol ip prio 3 u32 match ip dst 207.46.106.0/24 flowid 10:3 # irc tc filter add dev eth1 parent 10: protocol ip prio 3 u32 match ip dport 6666 0xff flowid 10:3 tc filter add dev eth1 parent 10: protocol ip prio 3 u32 match ip dport 6667 0xff flowid 10:3
# BANDA 4 - dcc , kazza , etc...
# unused yet , because I have to dig a little to find out KAZZA's ports
# BANDA 5 - cs
tc filter add dev eth1 parent 10: protocol ip prio 5 u32 match ip dport 27015 0xff flowid 10:5
# the rest of the traffic , not matched by any rule tc filter add dev eth1 parent 10: protocol ip prio 6 flowid 10:6
when executing the script , it's all ok , until the last line , when it's says:
"Unknown filter "flowid", hence option "10:6" is unparsable"
what's wrong ? I've looked on how-to and seems to be ok..
Quoted 7 lines
# the rest of the traffic , not matched by any rule tc filter add dev eth1 parent 10: protocol ip prio 6 flowid 10:6when executing the script , it's all ok , until the last line , when it's
says: "Unknown filter "flowid", hence option "10:6" is unparsable"what's wrong ? I've looked on how-to and seems to be ok..
You have to specify the filter you want to add : fw, u32 or so. And the options you want.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/