Skip to contentSkip to conversation

eql not teql problem

LARTC Eric Leblond 1 participant 1 message May 13, 2003

lore
Share & tools
lore
#0 lore raw
Quoted 3 lines

1. Slave devices MUST be active devices, i.e., they must raise the tbusy signal and generate EOI events. If you want to equalize virtual
devices like tunnels, use a normal eql device.

following htis advics I try to use eql to equalize my two gre tunnel. Things goes out very well but I'm not able to receive anything. All arrive to the tunnel interface but nothing arrive on the eql interface.
Has somebody any experience with such a setup ?

Any help appreciated

Signature · 2 lines
Eric Leblond <[email protected]>
Regit.org