why so fast?
Hi,
I am doing some test to control outgoing traffic, and I want to see if everything is working, but when I configure Compuetr A, and make a download in Computer B from A (e.g. in Computer A Apache is installed), the download goes so fast(not as in the ceil or rate!), even when I make the rate & ceil too small, am I doing something wrong??
Example on Computer A:
tc qdisc add dev eth0 root handle 1: htb default 19
tc class add dev eth0 parent 1: classid 1:1 htb rate 10bps ceil 10bps tc class add dev eth0 parent 1: classid 1:19 htb rate 15bps ceil 15bps
tc filter add dev eth0 parent 1: protocol ip handle 1 fw classid 1:1
iptables -t mangle -A OUTPUT -d 192.168.0.11 -j MARK --set-mark 1
#Compter B has ip 192.168.0.11
Thanx
_________________________________________________________________
Help STOP SPAM with the new MSN 8 and get 2 months FREE*
http://join.msn.com/?pageþatures/junkmail
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 9 lines · On Wednesday 14 May 2003 11:25, sun reflex4 wrote:
Hi,
I am doing some test to control outgoing traffic, and I want to see if everything is working, but when I configure Compuetr A, and make a download in Computer B from A (e.g. in Computer A Apache is installed), the download goes so fast(not as in the ceil or rate!), even when I make the rate & ceil too small, am I doing something wrong??
Example on Computer A:
tc qdisc add dev eth0 root handle 1: htb default 19
Quoted 7 lines
tc class add dev eth0 parent 1: classid 1:1 htb rate 10bps ceil 10bps tc class add dev eth0 parent 1: classid 1:19 htb rate 15bps ceil 15bps
tc filter add dev eth0 parent 1: protocol ip handle 1 fw classid 1:1
iptables -t mangle -A OUTPUT -d 192.168.0.11 -j MARK --set-mark 1
#Compter B has ip 192.168.0.11
Your setup is good, but you put all packets coming from computer A (and marked with 1) in class 1:1. The problem is that this is not a leaf class because it has a child class. And a non-leaf class can not transmit packets itself. So the packets are sended at link speed.
Solution : only leaf classes can shape traffic so make sure all packets ends up in a leaf class. You can do this by removing the filter statement so all packets are placed in the default class. Or change your filter statement so all packets marked with a 1 are redireted to class 1:19.
If you are interested, I did some tests myself. You can find the results on www.docum.org.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi Stef,
is class 1:1 really a non-leaf class? It doesn't have any children. I know your site, and actually it is the place, where I lerned all this stuff :)
Quoted 5 lines
tc qdisc add dev eth0 root handle 1: htb default 19
tc class add dev eth0 parent 1: classid 1:1 htb rate 10bps ceil 10bps tc class add dev eth0 parent 1: classid 1:19 htb rate 15bps ceil 15bps
Quoted 8 lines
tc filter add dev eth0 parent 1: protocol ip handle 1 fw classid 1:1
iptables -t mangle -A OUTPUT -d 192.168.0.11 -j MARK --set-mark 1
#Compter B has ip 192.168.0.11
Your setup is good, but you put all packets coming from computer A (and marked with 1) in class 1:1. The problem is that this is not a leaf class because it has a child class. And a non-leaf class can not transmit packets itself. So the packets are sended at link speed.
_________________________________________________________________
Help STOP SPAM with the new MSN 8 and get 2 months FREE*
http://join.msn.com/?pageþatures/junkmail
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 2 lines · On Wednesday 14 May 2003 12:02, sun reflex4 wrote:
Hi Stef,
is class 1:1 really a non-leaf class? It doesn't have any children.
Oops. Indeed.
But you better create 1 root class and add 1:1 and 1:19 to that root class.
Quoted 2 lines
I know your site, and actually it is the place, where I lerned all this stuff :)
Ok :)
Quoted 9 lines
Quoted 9 lines
tc qdisc add dev eth0 root handle 1: htb default 19
tc class add dev eth0 parent 1: classid 1:1 htb rate 10bps ceil 10bps tc class add dev eth0 parent 1: classid 1:19 htb rate 15bps ceil 15bps
tc filter add dev eth0 parent 1: protocol ip handle 1 fw classid 1:1
iptables -t mangle -A OUTPUT -d 192.168.0.11 -j MARK --set-mark 1
#Compter B has ip 192.168.0.11
Can you check to see the tc counters to make sure the packets are ending in the class you want?
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/