Problem creating a lot of classes
Hello,
I'm looking for a little advice. The following example works great for me on a small scale test, but I'm trying to implement this on a larger scale for a /22 address space, where every user is commited 1mbit of bandwidth. Unfortunately, when I try to create over 600 classes, I get a kernel panic (the threshold is somewhere between 600-750 for me).
I am using a Dell Poweredge 2450 with 1gig of ram, dual 733mhz, with a standard Redhat9 install/kernel.
Any suggestions, or alternative configurations would be appreciated.
Thanks,
Sharan Harkisoon
Here's the script:
#!/bin/sh
ingress=eth0
egress=eth1
downstream=1mbit
upstream=1mbit
#clear shaping on interfaces
tc qdisc del dev $egress root
tc qdisc add dev $egress root handle 1: htb default 1
tc class add dev $egress classid 1:1 htb rate $downstream tc class add dev $egress classid 1:2 htb rate $downstream tc class add dev $egress classid 1:3 htb rate $downstream ..
#ommitted
..
tc class add dev $egress classid 1:1021htb rate $downstream
tc filter add dev $egress protocol ip prio 1 u32 match ip dst 24.136.40.2 flowid 1:1 tc filter add dev $egress protocol ip prio 1 u32 match ip dst 24.136.40.3 flowid 1:2 tc filter add dev $egress protocol ip prio 1 u32 match ip dst 24.136.40.4 flowid 1:3 ..
#ommitted
..
tc filter add dev $egress protocol ip prio 1 u32 match ip dst 24.136.43.254 flowid 1:1021
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hey
It's a bug in TC, upgrade to a newer version and it should be fixed. I had the same problem on a dual xeon 2.4 ghz with crashed with 100 classes loaded. Did'nt understand why...
Regards
Matias Bjørling
----- Original Message -----
From: "Harkisoon Sharan (CCI-Gainesville)" <[email protected]>
To: <[email protected]>
Sent: Monday, May 19, 2003 4:21 PM
Subject: [LARTC] Problem creating a lot of classes
Hello,
I'm looking for a little advice. The following example works great for me on a small scale test, but I'm trying to implement this on a larger scale for a /22 address space, where every user is commited 1mbit of bandwidth. Unfortunately, when I try to create over 600 classes, I get a kernel panic (the threshold is somewhere between 600-750 for me).
I am using a Dell Poweredge 2450 with 1gig of ram, dual 733mhz, with a standard Redhat9 install/kernel.
Any suggestions, or alternative configurations would be appreciated.
Thanks,
Sharan Harkisoon
Here's the script:
#!/bin/sh
ingress=eth0
egress=eth1
downstream=1mbit
upstream=1mbit
#clear shaping on interfaces
tc qdisc del dev $egress root
tc qdisc add dev $egress root handle 1: htb default 1
tc class add dev $egress classid 1:1 htb rate $downstream tc class add dev $egress classid 1:2 htb rate $downstream tc class add dev $egress classid 1:3 htb rate $downstream ..
#ommitted
..
tc class add dev $egress classid 1:1021htb rate $downstream
tc filter add dev $egress protocol ip prio 1 u32 match ip dst 24.136.40.2 flowid 1:1
tc filter add dev $egress protocol ip prio 1 u32 match ip dst 24.136.40.3 flowid 1:2
tc filter add dev $egress protocol ip prio 1 u32 match ip dst 24.136.40.4 flowid 1:3
..
#ommitted
..
tc filter add dev $egress protocol ip prio 1 u32 match ip dst 24.136.43.254 flowid 1:1021
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Thank you Martias. I downloaded Devik's patch, which includes a patched TC binary. Works like a charm.
-----Original Message-----
From: Matias Bjørling [mailto:[email protected]]
Sent: Tuesday, May 20, 2003 9:32 AM
To: Harkisoon Sharan (CCI-Gainesville)
Cc: [email protected]
Subject: Re: [LARTC] Problem creating a lot of classes
Hey
It's a bug in TC, upgrade to a newer version and it should be fixed. I had the same problem on a dual xeon 2.4 ghz with crashed with 100 classes loaded. Did'nt understand why...
Regards
Matias Bjørling
----- Original Message -----
From: "Harkisoon Sharan (CCI-Gainesville)" <[email protected]>
To: <[email protected]>
Sent: Monday, May 19, 2003 4:21 PM
Subject: [LARTC] Problem creating a lot of classes
Hello,
I'm looking for a little advice. The following example works great for me on a small scale test, but I'm trying to implement this on a larger scale for a /22 address space, where every user is commited 1mbit of bandwidth. Unfortunately, when I try to create over 600 classes, I get a kernel panic (the threshold is somewhere between 600-750 for me).
I am using a Dell Poweredge 2450 with 1gig of ram, dual 733mhz, with a standard Redhat9 install/kernel.
Any suggestions, or alternative configurations would be appreciated.
Thanks,
Sharan Harkisoon
Here's the script:
#!/bin/sh
ingress=eth0
egress=eth1
downstream=1mbit
upstream=1mbit
#clear shaping on interfaces
tc qdisc del dev $egress root
tc qdisc add dev $egress root handle 1: htb default 1
tc class add dev $egress classid 1:1 htb rate $downstream tc class add dev $egress classid 1:2 htb rate $downstream tc class add dev $egress classid 1:3 htb rate $downstream ..
#ommitted
..
tc class add dev $egress classid 1:1021htb rate $downstream
tc filter add dev $egress protocol ip prio 1 u32 match ip dst 24.136.40.2 flowid 1:1
tc filter add dev $egress protocol ip prio 1 u32 match ip dst 24.136.40.3 flowid 1:2
tc filter add dev $egress protocol ip prio 1 u32 match ip dst 24.136.40.4 flowid 1:3
..
#ommitted
..
tc filter add dev $egress protocol ip prio 1 u32 match ip dst 24.136.43.254 flowid 1:1021
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/