configuration + HTB: question
Hello!
Can you help me with the following:
i want to devide traffic to clients from my server and from internet. my intention is to mark with iptables packets with src = 193.220.70.3 as local, and with another src as going from internet. i need fairly divide 60 Mbit of local traffic(traffic from my server) between ethernet clients(192.168.1.2 - 192.168.1.20)
i think i need to create class with rate 60Mbit(attach it to root qdisc) and to make 20 child classes with rate 32Kbit ceil 60Mbit and to attach to these child classes qdiscs with sfq. Then mark packets with src2.168.1.2-192.168.1.20 and to make thrm go to these clasess? Am i right, or wrong? Maybe there is better approach?
Thanks in advance for your help.
Best regards,
Ruslan
__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 12 lines · Ruslan Spivak
Hello!
Can you help me with the following:
i want to devide traffic to clients from my server and from internet. my intention is to mark with iptables packets with src = 193.220.70.3 as local, and with another src as going from internet. i need fairly divide 60 Mbit of local traffic(traffic from my server) between ethernet clients(192.168.1.2 - 192.168.1.20)
Quoted 7 lines
i think i need to create class with rate 60Mbit(attach it to root qdisc) and to make 20 child classes with rate 32Kbit ceil 60Mbit and to attach to these child classes qdiscs with sfq. Then mark packets with src2.168.1.2-192.168.1.20 and to make thrm go to these clasess? Am i right, or wrong? Maybe there is better approach?
I think you are on the right track. But I think it's better that you create 2 classes. One for the internet traffic and one for the local traffic. So you seperate the traffic from the internet from your local traffic. The internet traffic has ceil = rate = 256kbit. The local traffic has rate = 60mbit - 256kbit and ceil = 60mbit. If you want more control, you can add 1 class / pc to each of these 2 classes.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 40 lines · --- Stef Coene
Quoted 5 lines · Ruslan Spivak
Hello!
Can you help me with the following:
i want to devide traffic to clients from my server
and
Quoted 1 line
from internet. my intention is to mark with
iptables
Quoted 1 line
packets with src = 193.220.70.3 as local, and
with
Quoted 6 lines
another src as going from internet. i need fairly divide 60 Mbit of local traffic(traffic from my server) between ethernet clients(192.168.1.2 - 192.168.1.20)
i think i need to create class with rate
60Mbit(attach
Quoted 1 line
it to root qdisc) and to make 20 child classes
with
Quoted 1 line
rate 32Kbit ceil 60Mbit and to attach to these
child
Quoted 2 lines
classes qdiscs with sfq. Then mark packets with src2.168.1.2-192.168.1.20 and to make thrm go
to
Quoted 1 line
these clasess? Am i right, or wrong? Maybe there
is
Quoted 1 line
better approach?
I think you are on the right track. But I think it's better that you create 2
classes. One for the internet traffic and one for the local traffic. So you
seperate the traffic from the internet from your local traffic.
The internet traffic has ceil = rate = 256kbit. The local traffic has rate =
60mbit - 256kbit and ceil = 60mbit. If you want more control, you can add 1
class / pc to each of these 2 classes.
Quoted 2 lines
Stef
Thanks Stef,
Can you look at this, am i doing correct?
tc qdisc del dev eth0 root
# Add HTB root qdisc
tc qdisc add dev eth0 root handle 1: htb
# Add main 'local' rate class
tc class add dev eth0 parent 1: classid 1:1 htb rate 60Mbit
#add leaf classes(20 classes, one class for one ip in range 192.168.1.1 - 192.168.1.20)
tc class add dev eth0 parent 1:1 classid 1:20 htb rate 32kbit ceil 60�Mbit
tc class add dev eth0 parent 1:1 classid 1:21 htb rate 32kbit ceil 60�Mbit
tc class add dev eth0 parent 1:1 classid 1:22 htb rate 32kbit ceil 60�Mbit
tc class add dev eth0 parent 1:1 classid 1:23 htb rate 32kbit ceil 60�Mbit
...
tc class add dev eth0 parent 1:1 classid 1:39 htb rate 32kbit ceil 60�Mbit
# attach qdisc to leaf classes tc qdisc add dev eth0 parent 1:20 handle 20: sfq tc qdisc add dev eth0 parent 1:21 handle 21: sfq tc qdisc add dev eth0 parent 1:22 handle 22: sfq tc qdisc add dev eth0 parent 1:23 handle 23: sfq ... tc qdisc add dev eth0 parent 1:39 handle 39: sfq
# filter traffic into classes by fwmark tc filter add dev eth0 parent 1:0 protocol ip handle 1 fw flowid 1:20 tc filter add dev eth0 parent 1:0 protocol ip handle 2 fw flowid 1:21 tc filter add dev eth0 parent 1:0 protocol ip handle 3 fw flowid 1:22 tc filter add dev eth0 parent 1:0 protocol ip handle 4 fw flowid 1:23 ... tc filter add dev eth0 parent 1:0 protocol ip handle 1 fw flowid 1:39
# add fwmark entries iptables -t mangle -A OUTPUT -d 192.168.1.1 -j MARK --set-mark 1 iptables -t mangle -A OUTPUT -d 192.168.1.2 -j MARK --set-mark 2 iptables -t mangle -A OUTPUT -d 192.168.1.3 -j MARK --set-mark 3 iptables -t mangle -A OUTPUT -d 192.168.1.4 -j MARK --set-mark 4 ... iptables -t mangle -A OUTPUT -d 192.168.1.20 -j MARK --set-mark 39
But if i want to add one more ip, for example 192.168.1.21, i need:
1) add leaf class
2) attach to it qdisc with sfq
3) add filter by fwmark
4) add one entry with iptables to mark ip 192.168.1.21
Maybe i'm on wrong way or is it standard way for fairly dividing 60Mbit between users and what if i need to delete/add users dynamically?
I'm newbie to this and your help is very, very appreciated
Thanks in advance,
Ruslan
Quoted 10 lines
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:
__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 62 lines
Thanks Stef,
Can you look at this, am i doing correct?
tc qdisc del dev eth0 root
# Add HTB root qdisc
tc qdisc add dev eth0 root handle 1: htb# Add main 'local' rate class
tc class add dev eth0 parent 1: classid 1:1 htb rate 60Mbit#add leaf
classes(20 classes, one class for one ip in range 192.168.1.1 - 192.168.1.20)
tc class add dev eth0 parent 1:1 classid 1:20 htb rate 32kbit ceil 60Mbit
tc class add dev eth0 parent 1:1 classid 1:21 htb rate 32kbit ceil 60Mbit
tc class add dev eth0 parent 1:1 classid 1:22 htb rate 32kbit ceil 60Mbit
tc class add dev eth0 parent 1:1 classid 1:23 htb rate 32kbit ceil 60Mbit
...
tc class add dev eth0 parent 1:1 classid 1:39 htb rate 32kbit ceil 60Mbit# attach qdisc to leaf classes tc qdisc add dev eth0 parent 1:20 handle 20: sfq tc qdisc add dev eth0 parent 1:21 handle 21: sfq tc qdisc add dev eth0 parent 1:22 handle 22: sfq tc qdisc add dev eth0 parent 1:23 handle 23: sfq ... tc qdisc add dev eth0 parent 1:39 handle 39: sfq# filter traffic into classes by fwmark tc filter add dev eth0 parent 1:0 protocol ip handle 1 fw flowid 1:20 tc filter add dev eth0 parent 1:0 protocol ip handle 2 fw flowid 1:21 tc filter add dev eth0 parent 1:0 protocol ip handle 3 fw flowid 1:22 tc filter add dev eth0 parent 1:0 protocol ip handle 4 fw flowid 1:23 ... tc filter add dev eth0 parent 1:0 protocol ip handle 1 fw flowid 1:39# add fwmark entries iptables -t mangle -A OUTPUT -d 192.168.1.1 -j MARK --set-mark 1 iptables -t mangle -A OUTPUT -d 192.168.1.2 -j MARK --set-mark 2 iptables -t mangle -A OUTPUT -d 192.168.1.3 -j MARK --set-mark 3 iptables -t mangle -A OUTPUT -d 192.168.1.4 -j MARK --set-mark 4 ... iptables -t mangle -A OUTPUT -d 192.168.1.20 -j MARK --set-mark 39
Quoted 6 lines
But if i want to add one more ip, for example 192.168.1.21, i need:
1) add leaf class
2) attach to it qdisc with sfq
3) add filter by fwmark
4) add one entry with iptables to mark ip 192.168.1.21
Indeed.
You can reduce the number of fw filters rules if you use the mark as hash key. So if you add
tc filter add dev eth0 parent 1:0 protocol ip handle 1 fw
and you have a packet with mark 39, it will placed in class 1:39.
Quoted 5 lines
Maybe i'm on wrong way or is it standard way for fairly dividing 60Mbit between users and what if i need to delete/add users dynamically?
I'm newbie to this and your help is very, very appreciated
I think you implemented it like it should be. Each user a class.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/