fw mark on Ethernet bridge + HTB
Hi,
Fw marking using IP Tables does not work on an Ethernet bridge. Is it possible to set up the mark using iptables so that the packet can be directly routed to a predefined class using a mark value?
The advantage of this would be the one can use conntrack etc. to track connections and forward the packets to the correct class.
Example:
tc qdisc del dev eth0 root
tc qdisc add dev eth0 root handle 1: htb default 10
tc class add dev eth0 parent 1: classid 1:1 htb rate 512kbit ceil 512kbit tc class add dev eth0 parent 1:1 classid 1:10 htb rate 128kbit ceil 256kbit tc class add dev eth0 parent 1:1 classid 1:22 htb rate 64kbit ceil 256kbit prio 3 tc class add dev eth0 parent 1:1 classid 1:80 htb rate 64kbit ceil 128kbit prio 3
# traditional method of classifying traffic into flowids
tc filter add dev eth0 parent 1:1 protocol ip prio 3 u32 match ip sport 22 0xffff flowid 1:22 tc filter add dev eth0 parent 1:3 protocol ip prio 3 u32 match ip sport 80 0xffff flowid 1:80
-------
What I want to achieve is as follows
#set predefined marks
iptables -t mangle -A PREROUTING -i eth0 -p tcp --sport 22 -m state --state ESTABLISHED -j MARK --set-mark 22 iptables -t mangle -A PREROUTING -i eth0 -p tcp --sport 80 -m state --state ESTABLISHED -j MARK --set-mark 80
Now I want to be able to forward packets marked 22 to class 1:22 and those marked 80 sent to class 1:80 without using the tc fw filter ( as it does not work on bridges ).
Any help or pointers shall be highly appreciated.
Thanks
Rajesh