cbq bounded problem
Dear all,
I have 1 mbps line to internet.
Our linux server is connected to router of 1mb
Linux server gets 1mb bandwidth.
I have done SOURCE MASQUERADING on linux.
I have attached a cbq bandwidth script. I want to allow the traffic to restrict to 200Kbps. it should not exceed beyond 200.
I have made a configuration and i kept on the server but the traffic goes beyond 200 .....it even goes to 350 and 400. how can i restrict the traffic on 200. ????
plz check the attached script .
plz open in word.
any help is great for me.
Thanks,
Joel
#!/sbin/sh
TC= which tc
IP= which ip
d2vtotal=150
cable=170
jcom=45
collector=40
lakhanpal=36
ashwin=60
free=25
helpdesk=50
prabhu=30
cmnGp=35
cms=34
#### CONFIG FOR 10Mbit ROOT BANDWIDTH ####
$TC qdisc del dev eth4 root
$TC qdisc add dev eth4 root handle 10: cbq bandwidth 10Mbit avpkt 1000
$TC class add dev eth4 parent 10:0 classid 10:1 cbq bandwidth 10Mbit rate $[d2vtotal]Kbit allot 1514 weight 50Kbit prio 8 maxburst 20 avpkt 1000 bounded
#### CONFIG FOR FREE GROUP 30 KBPS ####
$TC class add dev eth4 parent 10:1 classid 10:100 cbq bandwidth 10Mbit rate $[free]Kbit allot 1514 weight 4kbit prio 3 maxburst 20 avpkt 1000 bounded
#### CONFIG FOR CABLE IN SHARING FOR 170 KBPS
$TC class add dev eth4 parent 10:1 classid 10:200 cbq bandwidth 10Mbit rate $[cable]Kbit allot 1514 weight 30Kbit prio 3 maxburst 20 avpkt 800 bounded
#### SFQ CONFIGURATION ####
$TC qdisc add dev eth4 parent 10:100 sfq quantum 1514b perturb 15 $TC qdisc add dev eth4 parent 10:200 sfq quantum 1514b perturb 15
#### RESTRICTION PER SUBNET FOR FREE GROUP 30KBPS ####
# $TC filter add dev eth4 parent 10:0 protocol ip prio 100 u32 match ip dst /28 flowid 10:100
#### INDIVIDUAL CONFIGURATION FOR JCOM / COLLECTOR / LAKHANPAL / ASHWIN ####
## COLLECTOR ##
$TC class add dev eth4 parent 10:200 classid 10:1000 cbq bandwidth 10Mbit rate $[collector]Kbit allot 1514 weight 10Kbit prio 3 maxburst 20 avpkt 800 bounded
$TC filter add dev eth4 parent 10:0 protocol ip prio 100 u32 match ip dst 10.2.1.40 flowid 10:1000
## LAKHANPAL ##
$TC class add dev eth4 parent 10:200 classid 10:1001 cbq bandwidth 10Mbit rate $[lakhanpal]Kbit allot 1514 weight 10Kbit prio 3 maxburst 20 avpkt 800 bounded
$TC filter add dev eth4 parent 10:0 protocol ip prio 100 u32 match ip dst 10.255.0.17 flowid 10:1001
## ASHWIN VANASPATI ##
$TC class add dev eth4 parent 10:200 classid 10:1002 cbq bandwidth 10Mbit rate $[ashwin]Kbit allot 1514 weight 10Kbit prio 3 maxburst 20 avpkt 800 bounded
$TC filter add dev eth4 parent 10:0 protocol ip prio 100 u32 match ip dst 10.1.1.8/29 flowid 10:1002
## JCOM ##
$TC class add dev eth4 parent 10:200 classid 10:1003 cbq bandwidth 10Mbit rate $[jcom]Kbit allot 1514 weight 10Kbit prio 3 maxburst 20 avpkt 800 bounded
$TC filter add dev eth4 parent 10:0 protocol ip prio 100 u32 match ip dst 10.100.2.2/29 flowid 10:1003 $TC filter add dev eth4 parent 10:0 protocol ip prio 100 u32 match ip dst 10.255.2.16/30 flowid 10:1003
## HELPDESK ##
$TC class add dev eth4 parent 10:200 classid 10:1004 cbq bandwidth 10Mbit rate $[helpdesk]Kbit allot 1514 weight 10Kbit prio 3 maxburst 20 avpkt 800 bounded $TC filter add dev eth4 parent 10:0 protocol ip prio 100 u32 match ip dst 10.2.5.15 flowid 10:1004
## PRABHU ##
$TC class add dev eth4 parent 10:200 classid 10:1005 cbq bandwidth 10Mbit rate $[prabhu]Kbit allot 1514 weight 10Kbit prio 3 maxburst 20 avpkt 800 bounded $TC filter add dev eth4 parent 10:0 protocol ip prio 100 u32 match ip dst 192.168.2.100 flowid 10:1005
$TC filter add dev eth4 parent 10:0 protocol ip prio 100 u32 match ip src 192.168.2.100 flowid 10:1005
## 203 ##
$TC class add dev eth4 parent 10:200 classid 10:1006 cbq bandwidth 10Mbit rate 30Kbit allot 1514 weight 10Kbit prio 3 maxburst 20 avpkt 1000 bounded $TC filter add dev eth4 parent 10:0 protocol ip prio 100 u32 match ip dst 192.168.3.100 flowid 10:1006
## 204 ##
$TC class add dev eth4 parent 10:200 classid 10:1007 cbq bandwidth 10Mbit rate 30Kbit allot 1514 weight 10Kbit prio 5 maxburst 20 avpkt 1000 bounded $TC filter add dev eth4 parent 10:0 protocol ip prio 100 u32 match ip dst 192.168.5.100 flowid 10:1007
## 205 ##
$TC class add dev eth4 parent 10:200 classid 10:1008 cbq bandwidth 10Mbit rate 30Kbit allot 1514 weight 10Kbit prio 5 maxburst 20 avpkt 1000 bounded $TC filter add dev eth4 parent 10:0 protocol ip prio 100 u32 match ip dst 192.168.6.100 flowid 10:1008
## 206 ##
$TC class add dev eth4 parent 10:200 classid 10:1009 cbq bandwidth 10Mbit rate 30Kbit allot 1514 weight 10Kbit prio 5 maxburst 20 avpkt 1000 bounded $TC filter add dev eth4 parent 10:0 protocol ip prio 100 u32 match ip dst 192.168.7.100 flowid 10:1009
## 207 ##
$TC class add dev eth4 parent 10:200 classid 10:1010 cbq bandwidth 10Mbit rate 30Kbit allot 1514 weight 10Kbit prio 5 maxburst 20 avpkt 1000 bounded $TC filter add dev eth4 parent 10:0 protocol ip prio 100 u32 match ip dst 192.168.8.100 flowid 10:1010
## CMS ##
$TC class add dev eth4 parent 10:200 classid 10:1011 cbq bandwidth 10Mbit rate $[cms]Kbit allot 1514 weight 10Kbit prio 5 maxburst 20 avpkt 1000 bounded $TC filter add dev eth4 parent 10:0 protocol ip prio 100 u32 match ip dst 192.168.10.100 flowid 10:1011
Quoted 13 lines · Zealous
Dear all,
I have 1 mbps line to internet.
Our linux server is connected to router of 1mb
Linux server gets 1mb bandwidth.
I have done SOURCE MASQUERADING on linux.
I have attached a cbq bandwidth script. I want to allow the traffic to restrict to 200Kbps. it should not exceed beyond 200.
Quoted 6 lines
I have made a configuration and i kept on the server but the traffic goes beyond 200 .....it even goes to 350 and 400. how can i restrict the traffic on 200. ????
plz check the attached script .
plz open in word.
any help is great for me.
Some tips :
- Adding the sfq qdisc to class 10:200 is useless. It's removed as soon as you add a subclass.
- Are you sure your packes are queued in the class you want? Check it out with tc -s -d class show dev eth4.
- prio 100 is too much. The maximum is 7.
- avpkt 800 should reflect your average packet size. Are you sure it's only 800 bytes?
- Is your NIC configured at 10Mbit? (bandwidth parameter)
Take weight = rate / 10.
- Use htb and visit www.docum.org :)
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
[LARTC] CBQ bounded problem
In reply to ZealousDear friends,
I have 1 mbps line connected to linux server.
from linux server i have masqueraded some clients. I want to use only 200 kbps. I have attached the script.
But on this script the traffic goes up to 350 kbps.
how can i bound the bandwidth to 200 kbps.
it should not exceed more than that.
plz see the script.
where m i wrong.
any suggestions???
Thanking You,
Joel