Skip to contentSkip to conversation

ip utility

LARTC [email protected] 3 participants 4 messages Jun 16, 2003

lore
Share & tools
lore
#1 lore raw

Hello,
for this purpose is mii-tool.

Quoted 9 lines · On Mon, 16 Jun 2003 [email protected] wrote:

Sorry for this trivial question

In many howto, i saw that ip utility replace gracefully the old ifconfig command.
However, i would like to know how we can manage speed and (half/full) duplex with such an utility

Thanks

--
`)_|_(' PSIkappa
I k psi _at_ talker.sk

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to [email protected]

Great! that's exactly what i needed!!
thanks

ps : Sorry for the private post, i pressed the send key too fast :)

Quoted 14 lines

Hello,
for this purpose is mii-tool.

Quoted 9 lines · On Mon, 16 Jun 2003 [email protected] wrote:

Sorry for this trivial question

In many howto, i saw that ip utility replace gracefully the old ifconfig command.
However, i would like to know how we can manage speed and (half/full) duplex with such an utility

Thanks

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to [email protected]
Quoted 3 lines · M.F. PSIkappa

Hello,
for this purpose is mii-tool.

Both mii-tool _and_ ethtool. It seems mii-tool is the old one, and works for some ethernet cards. ethtool is newer (and supposedly better), and works for some ethernet cards. Some cards are tunable with both commands, others with just one of them, others... don't work :-)

Hope it helps.

Signature · 5 lines
Jose Luis Domingo Lopez
Linux Registered User #189436     Debian Linux Sid (Linux 2.5.71-bk1)
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/