Skip to contentSkip to conversation

have any of you got my iproute2 directory?

LARTC Robin Szemeti 2 participants 3 messages Jun 16, 2003

lore
Share & tools
lore
#0 lore raw

for better or worse I have a machine running Redhat 7.1 .. which has iproute-2.2.4-7 installed ... but to me surprise does not appear to have a /etc/iproute2 directory .. (so adding a table to rt_tables is a bit tricky) ... a quick search doesnt locate that directory anywhere .. or the rt_tables file.

so .. what to do about that? can I just grab the files of another install or what?

Signature · 7 lines
Robin Szemeti

Redpoint Consulting Limited
Real Solutions For A Virtual World
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw

Robin,

: for better or worse I have a machine running Redhat 7.1 .. which has : iproute-2.2.4-7 installed ... but to me surprise does not appear to : have a /etc/iproute2 directory .. (so adding a table to rt_tables is a : bit tricky) ... a quick search doesnt locate that directory anywhere : .. or the rt_tables file.
:
: so .. what to do about that? can I just grab the files of another : install or what?

Yes--it's no problem to "borrow" a directory from another machine. If you had made any customizations to the /etc/iproute2/* files, then these are lost, but if you did such a thing, you probably know what you need to change.

I just checked a RedHat 7.1 box, and found no directory /etc/iproute2

$ ls -l /etc/iproute2/
total 20
-rw-r--r--    1 root     root          299 Aug  8  2001 rt_dsfield
-rw-r--r--    1 root     root          296 Aug  8  2001 rt_protos
-rw-r--r--    1 root     root          114 Aug  8  2001 rt_realms
-rw-r--r--    1 root     root           98 Aug  8  2001 rt_scopes
-rw-r--r--    1 root     root           92 Sep 10  2002 rt_tables

Here's roughly what it should look like though.

Best of luck,

-Martin

Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Robin Szemeti

OK .. well .. I made the directory and added the files, I still have problems :)

What I have is a box with two connections onto the internet, one slowish, on fast .. the default route is eth0, and as it stands, connections coming in on eth1 get answered by eth0, legal, but not what I want and are blocked by some stateful firewalls.

so ... I read the faq and did this:
#!/bin/bash

IP_CMD="/sbin/ip"

IF1=eth0
IP1= x.x.x.x
P1_NET=x.x.x.0/24
P1_GATE= x.x.x.1

IF2=eth1
IP2= y.y.y.y
P2_NET=y.y.y.0/24
P2_GATE=y.y.y.1

echo "flushing"
$IP_CMD route flush table T1
$IP_CMD route flush table T2
$IP_CMD route flush scope link

echo "eth0 routes in table 1"
$IP_CMD route add $P1_NET dev $IF1 src $IP1 table T1 $IP_CMD route add default via $P1_GATE table T1

echo "eth1 routes in table 2"
$IP_CMD route add $P2_NET dev $IF2 src $IP2 table T2 $IP_CMD route add default via $P2_GATE table T2

echo "assign routes to IP"

# make sure it goes out where it came in.
$IP_CMD route add $P1_NET dev $IF1 src $IP1
$IP_CMD route add $P2_NET dev $IF2 src $IP2
# default route
$IP_CMD route add default via $P1_GATE
$IP_CMD route add 127.0.0.0/8 dev lo

echo "assign tables to IP"
$IP_CMD rule add from $IP1 table T1
$IP_CMD rule add from $IP2 table T2
echo "done"

..... but I get :
flushing
eth0 routes in table 1
RTNETLINK answers: Network is unreachable
eth1 routes in table 2
RTNETLINK answers: Network is unreachable
assign routes to IP
RTNETLINK answers: File exists
assign tables to IP
done

and the asymetric routinf is still happening, so I guess its not worked then
...

suggestions ..?

Signature · 7 lines
Robin Szemeti

Redpoint Consulting Limited
Real Solutions For A Virtual World
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/