Skip to contentSkip to conversation

imq patches for 2.4.21 available

LARTC Patrick McHardy 2 participants 3 messages Jun 18, 2003

lore
Share & tools
lore
#0 lore raw

Jan Rafaj has been so kind to update the imq patch to 2.4.21 and iptables-1.2.8.
No functional changes have been made. The updated patch and instructions are available at http://trash.net/~kaber. This is the only place where this and future
updates (if any) will be available. I'm going to replace luxik.cdi.cz/~patrick/imq
with a redirect soon.

It is also mentioned on the webpage, but please note i do not actively maintain
imq anymore. Some people have had problems with crashes under some circumstances, unfortunately noone was able to provide me with useful information
for debugging. If you experience problems leading to crashes, please do not write
me unless you have a decoded oops.

Good luck ;)
Patrick

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

Something about IMQ device
I try to add imq0 with standard way in redhat distribution via ifcfg-imq0 file (and add line in modules.conf) and got BUG
If I attache IP address to IMQ device withing next hours (may be days, randomly) kernel crash with stack dump and panic
Without address same configuration work OK

On Wed, Jun 18, 2003 at 12:50:56PM +0200, Patrick McHardy wrote:
PM>Jan Rafaj has been so kind to update the imq patch to 2.4.21 and PM>iptables-1.2.8.
PM>No functional changes have been made. The updated patch and instructions are PM>available at http://trash.net/~kaber. This is the only place where this PM>and future
PM>updates (if any) will be available. I'm going to replace PM>luxik.cdi.cz/~patrick/imq
PM>with a redirect soon.
PM>
PM>It is also mentioned on the webpage, but please note i do not actively PM>maintain
PM>imq anymore. Some people have had problems with crashes under some PM>circumstances, unfortunately noone was able to provide me with useful PM>information
PM>for debugging. If you experience problems leading to crashes, please do PM>not write
PM>me unless you have a decoded oops.
PM>
PM>Good luck ;)
PM>Patrick
PM>
PM>_______________________________________________
PM>LARTC mailing list / [email protected] PM>http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Signature · 6 lines
Best regard, Aleksander Trotsai aka MAGE-RIPE aka MAGE-UANIC
My PGP key at ftp://blackhole.adamant.ua/pgp/trotsai.key[.asc]
Big trouble - Plate voltage too low on demodulator tube
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Patrick McHardy
Quoted 10 lines · Alexander Trotsai

Something about IMQ device
I try to add imq0 with standard way in redhat distribution via ifcfg-imq0 file (and add line in modules.conf) and got BUG
If I attache IP address to IMQ device withing next hours (may be days, randomly) kernel crash with stack dump and panic
Without address same configuration work OK

Not so bad because imq is not intended to have an ip address. Still, if you would like me to do something about it i need a decoded oops.

Bye,
Patrick

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/