Skip to contentSkip to conversation

Paquet pading problem using HTB+SFQ

LARTC Trevor Warren 2 participants 3 messages Jun 20, 2003 – Jun 24, 2003

lore
Share & tools
lore
#0 lore raw

Try removing the SFQ.

Trevor

Quoted 16 lines · Olivier DOURNAUX (DSI NOISIEL)

Hi,

I have set up QoS using HTB to identify classes and SFQ to order all classes traffic.

It work fine but sometime "strange" paquets are sent... They contains correct data but headers seams to be truncated: has if the FIRST few bits were lost, or some alignment problem... It doesn't occure if using other queue than SFQ.
It appends with 2.4.20 and 2.4.21.

Any idea ?
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Signature · 9 lines
( >-    GNU/LINUX, It's all about CHOICE      -< )
/~\    __  [email protected]  __   /~\
|  \) /  Pre Sales Consultant - Red Hat     \ (/ |
|_|_  \    9820349221(M) | 22881326(O)      / _|_|
       \___________________________________/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw

Hi,

I have set up QoS using HTB to identify classes and SFQ to order all classes traffic.

It work fine but sometime "strange" paquets are sent... They contains correct data but headers seams to be truncated: has if the FIRST few bits were lost, or some alignment problem... It doesn't occure if using other queue than SFQ.
It appends with 2.4.20 and 2.4.21.

Any idea ?
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to Trevor Warren

Yes.. But what about fairness ??

Olivier.

-----Message d'origine-----
De : Trevor Warren [mailto:[email protected]] Envoyé : vendredi 20 juin 2003 10:06
À : Olivier DOURNAUX (DSI NOISIEL)
Cc : lartc
Objet : Re: [LARTC] Paquet pading problem using HTB+SFQ

Try removing the SFQ.

Trevor

Quoted 16 lines · Olivier DOURNAUX (DSI NOISIEL)

Hi,

I have set up QoS using HTB to identify classes and SFQ to order all classes traffic.

It work fine but sometime "strange" paquets are sent... They contains correct data but headers seams to be truncated: has if the FIRST few bits were lost, or some alignment problem... It doesn't occure if using other queue than SFQ.
It appends with 2.4.20 and 2.4.21.

Any idea ?
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Signature · 9 lines
( >-    GNU/LINUX, It's all about CHOICE      -< )
/~\    __  [email protected]  __   /~\
|  \) /  Pre Sales Consultant - Red Hat     \ (/ |
|_|_  \    9820349221(M) | 22881326(O)      / _|_|
       \___________________________________/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/