Skip to contentSkip to conversation

HOW TO COMBINE 2 DSL LINES IN THE SAME COMPUTER

LARTC Trevor Warren 6 participants 8 messages Jun 20, 2003 – Jun 22, 2003

lore
Share & tools
lore
#0 lore raw

Hey pals...;)

RTFM. Check the LARTC HOWTO on the following points:

4. Rules - routing policy database

4.1. Simple source policy routing 4.2. Routing for multiple uplinks/providers

4.2.1. Split access
4.2.2. Load balancing

Trevor

Quoted 63 lines · José A. Calderón C.

It would be wonderful if someone answer your question. Put it on the list please.

-----Mensaje original-----
De: [email protected] [mailto:[email protected]]En nombre de Tesla 13
Enviado el: Friday, June 20, 2003 11:54 AM
Para: [email protected]
Asunto: [LARTC] HOW TO COMBINE 2 DSL LINES IN THE SAME COMPUTER

Hello,

I have 2 DSL lines on the same computer that gives me 2 different IP addresses on different subnets.

2M/256K: PPPoA
1M/256K: Classical IP over ATM

How can I combine them (1M line and 2M line) together so that I would be able to use them at the same time to pull in at 3 mbits?

I tried using both connections at the same time but one line maxes out (the one that has the default gateway), the other is staying there idly. I added the kernel.org route to use second connection. I can get 3 mbits download by ftping to to kernel.org (1 mbit line) and other FTP servers (2 mbit line, default gateway). Both lines are maxed out. How to do this for all connections without dropping them to the routing tables (it is not possible to know the IP addresses of all connections since I use file sharing software)

I am using Windows 2000 advanced server as my computer. The DSL modem has drivers that work only on Windows -- no Linux support, so it must be connected to a windows machine. I have single DSL modem, single DSL line to the telco but 2 profiles on the telco that I can use simultaneously. I cannot connect 2 connections to different computers. Both must be on the same machine.

I do have linux computers working.

Does anyone have any idea how to go about this?

I am not on the list, so please respond directly to my email [email protected]

Many thanks in advance for your time!

Jimmy

_________________________________________________________________
Add photos to your e-mail with MSN 8. Get 2 months FREE*.
http://join.msn.com/?pageþatures/featuredemail

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Signature · 9 lines
( >-    GNU/LINUX, It's all about CHOICE      -< )
/~\    __  [email protected]  __   /~\
|  \) /  Pre Sales Consultant - Red Hat     \ (/ |
|_|_  \    9820349221(M) | 22881326(O)      / _|_|
       \___________________________________/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw

J,

What i meant is...like in Linux you make use of the two external
connections and collate them as mentioned in the document. Can you try keeping the Linux box in front of the two windowze boxen and collate the two LAN connections coming from them as mentioned in the HOWTO???.

Trevor

Quoted 179 lines · On Sat, 2003-06-21 at 01:28, Tesla 13 wrote:

Hello Trevor,

Windows computer with DSL line connects directly to the ISP since DSL modem is installed there. How can I place anything in front of it?

HOWTO does not cut it for me. That is why I am asked to the list.

J.

Quoted 159 lines

From: Trevor Warren <[email protected]>
To: Tesla 13 <[email protected]>
Subject: RE: [LARTC] HOW TO COMBINE 2 DSL LINES IN THE SAME COMPUTER
Date: 20 Jun 2003 13:15:39 +0530

Hello J,

In my opinion if you have 2 windows boxes connecting to two of your
isps's networks then you can very well have the Linux box aggregate both of them for you by placing the Linux box in front of these two windows boxes....In theory as explained by the document.

Give this one a shot, an not too sure though J.

Trevor

Quoted 7 lines · On Sat, 2003-06-21 at 00:34, Tesla 13 wrote:

Hello Trevor,

Thank you for the response.

Yes, I read those.

However that assumes the cable is connected to the linux box. In my

case,

Quoted 1 line

internet connections are on windows box since DSL modem has no linux

driver

Quoted 3 lines

and linux is not supported by my ISP.

I would appreciate if you can tell me where to put windows computer with

the

Quoted 40 lines

DSL connection to the ISP and the linux computer.

Thanks!

J.

Quoted 32 lines

From: Trevor Warren <[email protected]>
To: "Jos \"A.\" Caldern \"C." <[email protected]>
CC: Tesla 13 <[email protected]>, lartc <[email protected]>
Subject: RE: [LARTC] HOW TO COMBINE 2 DSL LINES IN THE SAME COMPUTER
Date: 20 Jun 2003 12:20:40 +0530

Hey pals...;)

RTFM. Check the LARTC HOWTO on the following points:

4. Rules - routing policy database

4.1. Simple source policy routing 4.2. Routing for multiple uplinks/providers

4.2.1. Split access
4.2.2. Load balancing

Trevor

Quoted 7 lines · José A. Calderón C.

It would be wonderful if someone answer your question. Put it on the list please.

-----Mensaje original-----
De: [email protected]

[mailto:[email protected]]En

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

nombre de Tesla 13
Enviado el: Friday, June 20, 2003 11:54 AM
Para: [email protected]
Asunto: [LARTC] HOW TO COMBINE 2 DSL LINES IN THE SAME COMPUTER

Hello,

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines

I have 2 DSL lines on the same computer that gives me 2 different IP addresses on different subnets.

2M/256K: PPPoA
1M/256K: Classical IP over ATM

How can I combine them (1M line and 2M line) together so that I

would be

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

able to use them at the same time to pull in at 3 mbits?

I tried using both connections at the same time but one line maxes

out

Quoted 2 lines
Quoted 2 lines

(the

Quoted 1 line

one that has the default gateway), the other is staying there idly.

I

Quoted 4 lines
Quoted 4 lines

added

Quoted 1 line

the kernel.org route to use second connection. I can get 3 mbits

download by

Quoted 1 line

ftping to to kernel.org (1 mbit line) and other FTP servers (2 mbit

Quoted 8 lines
Quoted 8 lines

line,

Quoted 2 lines

default gateway). Both lines are maxed out. How to do this for all connections without dropping them to the routing tables (it is not

possible

Quoted 4 lines

to know the IP addresses of all connections since I use file sharing software)

I am using Windows 2000 advanced server as my computer. The DSL

modem

Quoted 3 lines
Quoted 3 lines

has

Quoted 2 lines

drivers that work only on Windows -- no Linux support, so it must be connected to a windows machine. I have single DSL modem, single DSL

line

Quoted 2 lines
Quoted 2 lines

to

Quoted 1 line

the telco but 2 profiles on the telco that I can use simultaneously.

I

Quoted 1 line
Quoted 1 line
Quoted 1 line

cannot connect 2 connections to different computers. Both must be on

the

Quoted 13 lines
Quoted 13 lines
Quoted 13 lines

same machine.

I do have linux computers working.

Does anyone have any idea how to go about this?

I am not on the list, so please respond directly to my email [email protected]

Many thanks in advance for your time!

Jimmy

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines

_________________________________________________________________
Add photos to your e-mail with MSN 8. Get 2 months FREE*.
http://join.msn.com/?pageþatures/featuredemail

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:

http://lartc.org/

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:

http://lartc.org/

Quoted 7 lines
Quoted 7 lines

--
( >- GNU/LINUX, It's all about CHOICE -< )
/~\ __ [email protected] __ /~\

|  \) /  Pre Sales Consultant - Red Hat     \ (/ |
|_|_  \    9820349221(M) | 22881326(O)      / _|_|
       \___________________________________/
Quoted 7 lines
Quoted 3 lines

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_________________________________________________________________
MSN 8 with e-mail virus protection service: 2 months FREE*
http://join.msn.com/?pageþatures/virus

Quoted 7 lines

--
( >- GNU/LINUX, It's all about CHOICE -< )
/~\ __ [email protected] __ /~\

|  \) /  Pre Sales Consultant - Red Hat     \ (/ |
|_|_  \    9820349221(M) | 22881326(O)      / _|_|
       \___________________________________/

_________________________________________________________________
STOP MORE SPAM with the new MSN 8 and get 2 months FREE*
http://join.msn.com/?pageþatures/junkmail

Signature · 9 lines
( >-    GNU/LINUX, It's all about CHOICE      -< )
/~\    __  [email protected]  __   /~\
|  \) /  Pre Sales Consultant - Red Hat     \ (/ |
|_|_  \    9820349221(M) | 22881326(O)      / _|_|
       \___________________________________/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Trevor Warren

Hello,

I have 2 DSL lines on the same computer that gives me 2 different IP addresses on different subnets.

2M/256K: PPPoA
1M/256K: Classical IP over ATM

How can I combine them (1M line and 2M line) together so that I would be able to use them at the same time to pull in at 3 mbits?

I tried using both connections at the same time but one line maxes out (the one that has the default gateway), the other is staying there idly. I added the kernel.org route to use second connection. I can get 3 mbits download by ftping to to kernel.org (1 mbit line) and other FTP servers (2 mbit line, default gateway). Both lines are maxed out. How to do this for all connections without dropping them to the routing tables (it is not possible to know the IP addresses of all connections since I use file sharing software)

I am using Windows 2000 advanced server as my computer. The DSL modem has drivers that work only on Windows -- no Linux support, so it must be connected to a windows machine. I have single DSL modem, single DSL line to the telco but 2 profiles on the telco that I can use simultaneously. I cannot connect 2 connections to different computers. Both must be on the same machine.

I do have linux computers working.

Does anyone have any idea how to go about this?

I am not on the list, so please respond directly to my email [email protected]

Many thanks in advance for your time!

Jimmy

_________________________________________________________________
Add photos to your e-mail with MSN 8. Get 2 months FREE*.
http://join.msn.com/?pageþatures/featuredemail

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to Trevor Warren

It would be wonderful if someone answer your question. Put it on the list please.

-----Mensaje original-----
De: [email protected] [mailto:[email protected]]En nombre de Tesla 13
Enviado el: Friday, June 20, 2003 11:54 AM
Para: [email protected]
Asunto: [LARTC] HOW TO COMBINE 2 DSL LINES IN THE SAME COMPUTER

Hello,

I have 2 DSL lines on the same computer that gives me 2 different IP addresses on different subnets.

2M/256K: PPPoA
1M/256K: Classical IP over ATM

How can I combine them (1M line and 2M line) together so that I would be able to use them at the same time to pull in at 3 mbits?

I tried using both connections at the same time but one line maxes out (the one that has the default gateway), the other is staying there idly. I added the kernel.org route to use second connection. I can get 3 mbits download by ftping to to kernel.org (1 mbit line) and other FTP servers (2 mbit line, default gateway). Both lines are maxed out. How to do this for all connections without dropping them to the routing tables (it is not possible to know the IP addresses of all connections since I use file sharing software)

I am using Windows 2000 advanced server as my computer. The DSL modem has drivers that work only on Windows -- no Linux support, so it must be connected to a windows machine. I have single DSL modem, single DSL line to the telco but 2 profiles on the telco that I can use simultaneously. I cannot connect 2 connections to different computers. Both must be on the same machine.

I do have linux computers working.

Does anyone have any idea how to go about this?

I am not on the list, so please respond directly to my email [email protected]

Many thanks in advance for your time!

Jimmy

_________________________________________________________________
Add photos to your e-mail with MSN 8. Get 2 months FREE*.
http://join.msn.com/?pageþatures/featuredemail

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#4 lore raw
In reply to Trevor Warren
Quoted 9 lines

I have 2 DSL lines on the same computer that gives me 2 different IP

addresses on different subnets.

2M/256K: PPPoA
1M/256K: Classical IP over ATM

How can I combine them (1M line and 2M line) together so that I would be able to use them at the same time to pull in at 3 mbits?

I think it would not be able to do it, since both links are not the same speed. But please correct me. I think I am right, but I may not be.

It is like when you want to do trunking on switches, that means, combine 2 or more ports on a switch to get more bw available. If the ports were not of the same speed, that would not be possible to achieve. And of course, all the ports must be full duplex. The technique is to send out data on a port at a time, in a known sequence. If ports are not the same speed, data on "x" port would arrive first than data on "y" port, being imposible to rearrenge packets on the other end, is it clear?

And why being full duplex? Well, for the same reason. If ports are not full duplex, then if you sent out data on port "x" but suddenly you are receiving data on port "y", what you had to send on port "y" will have to wait. But in that time, data is travelling across link "x", and data sent out on port "x" will arrive without their "parent" data which had to be sent thru port "y". Concluding, when data sent on port "x" arrives to the other end, data that had to be sent on port "y" will have not arrived yet.

I hope I was clear.

lucas

Signature · 9 lines
 ___
/\  \        __     __   _______     _____     _____
\ \  \      /\  \ /\  \ /  _____\  /  ____ \  /\  ___\
 \ \  \_____\ \  \\_|  \\  \____/_ /\    __  \\ \ ____ \
  \ \_______\\ \______ / \  ______\\ \__\_/\__\\//\_____\
   \/_______/ \/_____ /   \/______/ \/__/ \/__/  \/_____/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#5 lore raw
In reply to Trevor Warren
Quoted 2 lines · Lucas Aimaretto

It is like when you want to do trunking on switches, that means, combine 2 or more ports on a switch to get more bw available.

You must be referring to "bonding" or "EtherChannel". I have tried it in linux. What you are saying can't work, becouse:
bonding, creates a seperate virtual network interface, which is the one with the combined speed. THIS is the one you assign your IP to. The real network interfaces aren't assigned any ip, they are used directly by the bonding driver.
What is more, this technology cannot be used for connecting a single computer to multiple networks. It is used to connect to another SINGLE device, which uses the same technology.
The only way that I know of, is using BGP on BOTH sides of a routing device, and set both metrics to the same value, for the default destination. I am pretty sure that BGP is not offered by any provider here in Greece, except if you a corporate customer, for example buying several megabits of bandwidth, using a leased line.
Maybe linux's policy routing could do the task. But I haven't tried anything even remotely similar.
A few month I asked my Cisco instructor for that same problem. He told me that it CAN be done, but it SHOULDN'T be done, becouse it is not stable, by design.

- Giannis Stoilis

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#6 lore raw
In reply to Trevor Warren
Quoted 10 lines · Tesla 13 wrote:

Hello,

I have 2 DSL lines on the same computer that gives me 2 different IP addresses on different subnets.

2M/256K: PPPoA
1M/256K: Classical IP over ATM

How can I combine them (1M line and 2M line) together so that I would be able to use them at the same time to pull in at 3 mbits?

iproute2 will do this. There is an example in the online Policy Routing Book at policyrouting.org

/steve

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#7 lore raw
In reply to Trevor Warren

El Fri, 20 Jun 2003 22:28:57 +0300
Giannis Stoilis <[email protected]> escribio:

Quoted 10 lines
Quoted 2 lines · Lucas Aimaretto

It is like when you want to do trunking on switches, that means, combine 2 or more ports on a switch to get more bw available.

You must be referring to "bonding" or "EtherChannel". I have tried it in linux. What you are saying can't work, becouse:
bonding, creates a seperate virtual network interface, which is the one with the combined speed. THIS is the one you assign your IP to. The real network interfaces aren't assigned any ip, they are used directly by the bonding driver.

yes, that's right .... well, I tried to say that, I was not as clear as I tought...

Quoted 3 lines

What is more, this technology cannot be used for connecting a single computer to multiple networks. It is used to connect to another SINGLE device, which uses the same technology.

well, again, that is why I think it will not work. If you want to combine these two real adsl interfaces into one virtual interface, you'll have to do it on the other end .... and as these lines are not the same speed, packets will not arrive at the same time for a correct re-arrengement.

Quoted 3 lines

A few month I asked my Cisco instructor for that same problem. He told me that it CAN be done, but it SHOULDN'T be done, becouse it is not stable, by design.

I've never tried, thoug if you have to adsl links of same speed, on both ends, I think it could be possibly done. I repeat, I've done this on switches, but only switches ....

lucas

----
El proposito de elegir funcionarios es que nosotros
no tengamos que pensar.
Homero Simpson
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/