ip rule and DNAT
My setup looks like this
1inet---(yy.yy.186.12)router---network 172.16.0.0/16
(xx.xx.251.73)
|
|
2inetRouter is doing masquerade. There was one link to internet. I need to connect to some host in 172.16.0.0 network so I'm doing DNAT. That was working quite well until second link to internet was added.
After adding ip rule to allow using both internet connections from outside DNAT stopped working.
[root@osrodek root]# ip rule
0: from all lookup local 32764: from yy.yy.186.12 lookup 10 32765: from all lookup main 32766: from all lookup main 32767: from all lookup default
[root@osrodek root]# ip route show table main
[...]
172.16.100.2 dev eth1 proto kernel scope link src 172.16.100.1 172.16.0.0/12 via 172.16.100.2 dev eth1
default via xx.xx.251.73 dev eth0 onlink
[root@osrodek root]# ip route show table 10
default via yy.yy.186.254 dev eth0
table main is used for routing through 2inet connection while table 10 is used for routing through 1inet connection.
DNAT rules:
[root@osrodek root]# iptables -L -n -t nat | grep ":22"
DNAT tcp --- 0.0.0.0/0 xx.xx.251.74 tcp dpt:11022 to:172.16.100.4:22 DNAT tcp --- 0.0.0.0/0 xx.xx.251.74 tcp dpt:12022 to:172.16.100.2:22 DNAT tcp --- 0.0.0.0/0 xx.xx.251.74 tcp dpt:10022 to:172.16.2.254:22 DNAT tcp --- 0.0.0.0/0 yy.yy.186.12 tcp dpt:11022 to:172.16.100.4:22 DNAT tcp --- 0.0.0.0/0 yy.yy.186.12 tcp dpt:12022 to:172.16.100.2:22 DNAT tcp --- 0.0.0.0/0 yy.yy.186.12 tcp dpt:10022 to:172.16.2.254:22
When I connect to ie. xx.xx.251.74:11022 or yy.yy.186.12:11022 then I just get timeout. Packets seems not comming back :/ Without ip rules everything works fine (but I can use only one inet connection then)
Any ideas?
Signature · 5 lines
Arkadiusz Mi¶kiewicz CS at FoE, Wroclaw University of Technology arekmatssedotpl AM2-6BONE, 1024/3DB19BBD, arekm(at)ircnet, PLD/Linux _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
My setup looks like this
1inet---(yy.yy.186.12)router---network 172.16.0.0/16
(xx.xx.251.73)
|
|
2inetRouter is doing masquerade. There was one link to internet. I need to connect to some host in 172.16.0.0 network so I'm doing DNAT. That was working quite well until second link to internet was added.
After adding ip rule to allow using both internet connections from outside DNAT stopped working.
[root@osrodek root]# ip rule
0: from all lookup local 32764: from yy.yy.186.12 lookup 10 32765: from all lookup main 32766: from all lookup main 32767: from all lookup default
[root@osrodek root]# ip route show table main
[...]
172.16.100.2 dev eth1 proto kernel scope link src 172.16.100.1 172.16.0.0/12 via 172.16.100.2 dev eth1
default via xx.xx.251.73 dev eth0 onlink
[root@osrodek root]# ip route show table 10
default via yy.yy.186.254 dev eth0
table main is used for routing through 2inet connection while table 10 is used for routing through 1inet connection.
DNAT rules:
[root@osrodek root]# iptables -L -n -t nat | grep ":22"
DNAT tcp --- 0.0.0.0/0 xx.xx.251.74 tcp dpt:11022 to:172.16.100.4:22 DNAT tcp --- 0.0.0.0/0 xx.xx.251.74 tcp dpt:12022 to:172.16.100.2:22 DNAT tcp --- 0.0.0.0/0 xx.xx.251.74 tcp dpt:10022 to:172.16.2.254:22 DNAT tcp --- 0.0.0.0/0 yy.yy.186.12 tcp dpt:11022 to:172.16.100.4:22 DNAT tcp --- 0.0.0.0/0 yy.yy.186.12 tcp dpt:12022 to:172.16.100.2:22 DNAT tcp --- 0.0.0.0/0 yy.yy.186.12 tcp dpt:10022 to:172.16.2.254:22
When I connect to ie. xx.xx.251.74:11022 or yy.yy.186.12:11022 then I just get timeout. Packets seems not comming back :/ Without ip rules everything works fine (but I can use only one inet connection then)
Any ideas?
Signature · 6 lines
Arkadiusz Mi¶kiewicz CS at FoE, Wroclaw University of Technology arekmatssedotpl AM2-6BONE, 1024/3DB19BBD, arekm(at)ircnet, PLD/Linux _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/