bandwidth limiting incoming data
Hello Sreram,
AFAIK all Traffic Shaping be it Ingress/Egress can be done at your end.
This will help majorly on the link at your end by prioritising trafic appropriately.
You can't possibly change traffic priorities at your isps end.
Trevor
Quoted 22 lines · K S Sreeram
Hi
I am connected to the internet thru a 128kbps connection, with a single box. There is no separate router.
I have a 'cvs update' going on for a rather large repository. Whenever there is any HTTP traffic(browser/wget/apt-get etc), the CVS traffic seems to come to a halt. So it looks like my ISP is giving higher priority to HTTP traffic.
Is there any way I can give higher priority to the CVS traffic?
I have read lartc, but all the techniques it talks about (cbq, htb etc) works only for outgoing traffic, not for incoming data. I am not sure if the ingress qdisc is suitable for this problem
In freebsd, I could use 'ipfw pipes' to control incoming traffic too.. Is there a similar mechanism that can be done in linux?
Regards
Thanks in Advance!
Signature · 9 lines
( >- GNU/LINUX, It's all about CHOICE -< ) /~\ __ [email protected] __ /~\ | \) / Pre Sales Consultant - Red Hat \ (/ | |_|_ \ 9820349221(M) | 22881326(O) / _|_| \___________________________________/ _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi
I am connected to the internet thru a 128kbps connection, with a single box. There is no separate router.
I have a 'cvs update' going on for a rather large repository. Whenever there is any HTTP traffic(browser/wget/apt-get etc), the CVS traffic seems to come to a halt. So it looks like my ISP is giving higher priority to HTTP traffic.
Is there any way I can give higher priority to the CVS traffic?
I have read lartc, but all the techniques it talks about (cbq, htb etc) works only for outgoing traffic, not for incoming data. I am not sure if the ingress qdisc is suitable for this problem
In freebsd, I could use 'ipfw pipes' to control incoming traffic too.. Is there a similar mechanism that can be done in linux?
Regards
Thanks in Advance!
Signature · 8 lines
K S Sreeram Director of Research Tachyon Technologies Pvt. Ltd. _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 8 lines · Trevor Warren
Hello Sreram,
AFAIK all Traffic Shaping be it Ingress/Egress can be done at your end.
This will help majorly on the link at your end by prioritising trafic appropriately.You can't possibly change traffic priorities at your isps end.
Maybe my mail wasnt clear, but what i wanted to know is how to shape incoming traffic on my box, and not at the ISP's end, which I cant control.
Quoted 31 lines · K S Sreeram
Quoted 22 lines
Hi
I am connected to the internet thru a 128kbps connection, with a single box. There is no separate router.
I have a 'cvs update' going on for a rather large repository. Whenever there is any HTTP traffic(browser/wget/apt-get etc), the CVS traffic seems to come to a halt. So it looks like my ISP is giving higher priority to HTTP traffic.
Is there any way I can give higher priority to the CVS traffic?
I have read lartc, but all the techniques it talks about (cbq, htb etc) works only for outgoing traffic, not for incoming data. I am not sure if the ingress qdisc is suitable for this problem
In freebsd, I could use 'ipfw pipes' to control incoming traffic too.. Is there a similar mechanism that can be done in linux?
Regards
Thanks in Advance!
Signature · 5 lines
( >- GNU/LINUX, It's all about CHOICE -< ) /~\ __ [email protected] __ /~\ | \) / Pre Sales Consultant - Red Hat \ (/ | |_|_ \ 9820349221(M) | 22881326(O) / _|_| \___________________________________/
Signature · 8 lines
K S Sreeram Director of Research Tachyon Technologies Pvt. Ltd. _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 4 lines · S Mohan
Let us say eth0 is connected the Internet and eth1 to the local LAN. Then shaping outgoing traffic on eth1 is equivalent to throttling incoming on eth0. Another alternative is to use the IMQ device. I recommend the first method.
The problem is that I dont have a separate router. I have a single machine (a laptop), which is connected to the internet with a 128kbps connection.
I dont know how to do incoming traffic shaping, when only one machine is present, which is typical in home usage scenarios.
Quoted 63 lines
-----Original Message-----
From: [email protected] [mailto:[email protected]]On Behalf Of K S Sreeram
Sent: Monday, June 23, 2003 6:01 PM
To: lartc
Subject: Re: [LARTC] bandwidth limiting incoming dataQuoted 8 lines · Trevor Warren
Hello Sreram,
AFAIK all Traffic Shaping be it Ingress/Egress can be done at your end.
This will help majorly on the link at your end by prioritising trafic appropriately.You can't possibly change traffic priorities at your isps end.
Maybe my mail wasnt clear, but what i wanted to know is how to shape incoming traffic on my box, and not at the ISP's end, which I cant control.
Quoted 23 lines · K S Sreeram
Quoted 21 lines
Hi
I am connected to the internet thru a 128kbps connection, with a single box. There is no separate router.
I have a 'cvs update' going on for a rather large repository. Whenever there is any HTTP traffic(browser/wget/apt-get etc), the CVS traffic seems to come to a halt. So it looks like my ISP is giving higher priority to HTTP traffic.
Is there any way I can give higher priority to the CVS traffic?
I have read lartc, but all the techniques it talks about (cbq, htb etc) works only for outgoing traffic, not for incoming data. I am not sure if the ingress qdisc is suitable for this problem
In freebsd, I could use 'ipfw pipes' to control incoming traffic too.. Is there a similar mechanism that can be done in linux?
Regards
Quoted 8 lines
Quoted 1 line
Thanks in Advance!
--
( >- GNU/LINUX, It's all about CHOICE -< )
/~\ __ [email protected] __ /~\| \) / Pre Sales Consultant - Red Hat \ (/ | |_|_ \ 9820349221(M) | 22881326(O) / _|_| \___________________________________/--
K S Sreeram
Director of Research
Tachyon Technologies Pvt. Ltd._______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Signature · 8 lines
K S Sreeram Director of Research Tachyon Technologies Pvt. Ltd. _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 7 lines · K S Sreeram
Quoted 6 lines · Trevor Warren
Hello Sreram,
AFAIK all Traffic Shaping be it Ingress/Egress can be done at your end.
This will help majorly on the link at your end by prioritising trafic appropriately.
Quoted 5 lines
Quoted 1 line
You can't possibly change traffic priorities at your isps end.
Maybe my mail wasnt clear, but what i wanted to know is how to shape incoming traffic on my box, and not at the ISP's end, which I cant control.
Incoming traffic can be controlled with filters + policers. Or a more complicated setup can be done with IMQ + HTB.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Stef,
Can you point me to the location of the docs for the filters + policers?
Quoted 21 lines · Stef Coene
Quoted 8 lines · K S Sreeram
Quoted 6 lines · Trevor Warren
Hello Sreram,
AFAIK all Traffic Shaping be it Ingress/Egress can be done at your end. This will help majorly on the link at your end by prioritising trafic appropriately.
Quoted 5 lines
Quoted 1 line
You can't possibly change traffic priorities at your isps end.
Maybe my mail wasnt clear, but what i wanted to know is how to shape incoming traffic on my box, and not at the ISP's end, which I cant control.
Incoming traffic can be controlled with filters + policers. Or a more complicated setup can be done with IMQ + HTB.
Stef
Signature · 10 lines
Bernard Robbins Systems Support Specialist VLM International, Inc. ___________________________________________ [I@myself src]# make me --with-more_time --with-more_money 90% of being smart is knowing what you're dumb at. _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi
I would strongly recommend going with IMQ + HTB. I just installed it yesterday. It just works beautifully. It gives you the full flexibility in using HTB SFQ etc, to shape incoming traffic.
Makes me wonder... How come IMQ is not yet part of the standard kernel? Is it going to be coming in 2.4.22?
Thanks
&
Regards
Quoted 40 lines · Bernard Robbins
Stef,
Can you point me to the location of the docs for the filters + policers?
Quoted 21 lines · Stef Coene
Quoted 8 lines · K S Sreeram
Quoted 6 lines · Trevor Warren
Hello Sreram,
AFAIK all Traffic Shaping be it Ingress/Egress can be done at your end. This will help majorly on the link at your end by prioritising trafic appropriately.
Quoted 5 lines
Quoted 1 line
You can't possibly change traffic priorities at your isps end.
Maybe my mail wasnt clear, but what i wanted to know is how to shape incoming traffic on my box, and not at the ISP's end, which I cant control.
Incoming traffic can be controlled with filters + policers. Or a more complicated setup can be done with IMQ + HTB.
Stef
Signature · 10 lines
Bernard Robbins Systems Support Specialist VLM International, Inc. ___________________________________________ [I@myself src]# make me --with-more_time --with-more_money 90% of being smart is knowing what you're dumb at. _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Signature · 8 lines
K S Sreeram Director of Research Tachyon Technologies Pvt. Ltd. _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 9 lines · Bernard Robbins
Stef,
Can you point me to the location of the docs for the filters + policers?
Quoted 4 lines
Incoming traffic can be controlled with filters + policers. Or a more complicated setup can be done with IMQ + HTB.
Stef
I could use this information also..
TIA,
Steve
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 11 lines · Steve Wright
Quoted 8 lines · Bernard Robbins
Stef,
Can you point me to the location of the docs for the filters + policers?
Quoted 4 lines
Incoming traffic can be controlled with filters + policers. Or a more complicated setup can be done with IMQ + HTB.
Stef
I could use this information also..
There is some information in the lartc howto about policers. That's all I have. For imq, you can search the lartc archives.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/