HTB Kernel log (cl && cl->un.leaf.q->q.qlen)
OK No problem!
I'm useing Slack 9.0/2.4.20( AMD K6 2-333Mhz with RAM 128MB) with HTB from kernel...and U32 filters!
/* How can I tweak bash or something ...to get high histoy on Shift+PageUP and a higher bashhistory, too */
The dmesg paste:
KERNEL: assertion (cl && cl->un.leaf.q->q.qlen) failed at sch_htb.c(959)
KERNEL: assertion (cl && cl->un.leaf.q->q.qlen) failed at sch_htb.c(959)
KERNEL: assertion (cl && cl->un.leaf.q->q.qlen) failed at sch_htb.c(959)
KERNEL: assertion (cl && cl->un.leaf.q->q.qlen) failed at sch_htb.c(959)
KERNEL: assertion (cl && cl->un.leaf.q->q.qlen) failed at sch_htb.c(959)
KERNEL: assertion (cl && cl->un.leaf.q->q.qlen) failed at sch_htb.c(959)
eth0: Promiscuous mode enabled.
device eth0 entered promiscuous mode
eth1: Promiscuous mode enabled.
device eth1 entered promiscuous mode
tcpdump uses obsolete (PF_INET,SOCK_PACKET)
eth0: Promiscuous mode enabled.
device eth0 left promiscuous mode
eth1: Promiscuous mode enabled.
device eth1 left promiscuous mode
htb*g j20405
htb*r7 m=0
htb*r6 m=0
htb*r5 m=0
htb*r4 m=0
htb*r3 m=0
htb*r2 m=0
htb*r1 m=0
htb*r0 m=0
htb*c10011 m=2 tb2399 cb2399 pq=0 dfv1856 ql=0 pa=0 f:
htb*c10231 m=2 t8505 c040 pq=0 df`000000 ql=0 pa=0 f:
htb*c10246 m=2 t0741 c740 pq=0 dfI152 ql=0 pa=0 f:
htb*c10099 m=2 t3067 c065 pq=0 dfH00512 ql=0 pa=0 f:
htb*c10001 m=2 t=-4595 c=-4595 pq=0 df�92 ql=0 pa=0 f:
htb*c10230 m=2 t7807 c189 pq=0 df`000000 ql=0 pa=0 f:
htb*c10247 m=2 t7807 c189 pq=0 df`000000 ql=0 pa=0 f:
htb*c10222 m=2 t538 c538 pq=0 df�92 ql=0 pa=0 f:
htb*c10002 m=2 t=-9823 c=-14019 pq=0 df�92 ql=0 pa=0 f:
htb*c10233 m=2 t7807 c189 pq=0 df`000000 ql=0 pa=0 f:
htb*c10244 m=2 t7807 c189 pq=0 df`000000 ql=0 pa=0 f:
htb*c10102 m=2 t4534 c840 pq=0 df`000000 ql=0 pa=0 f:
htb*c10232 m=2 t7807 c189 pq=0 df`000000 ql=0 pa=0 f:
htb*c10254 m=2 t7807 c189 pq=0 df`000000 ql=0 pa=0 f:
htb*c10105 m=2 t3585 c815 pq=0 df04224 ql=0 pa=0 f:
htb*c10235 m=2 t5483 c866 pq=0 df382272 ql=0 pa=0 f:
htb*c10242 m=2 t2119 c040 pq=0 df`000000 ql=0 pa=0 f:
htb*c10253 m=2 t8845 c690 pq=0 df87840 ql=0 pa=0 f:
htb*c10027 m=2 tY392 cY392 pq=0 df`000000 ql=0 pa=0 f:
htb*c10115 m=2 t7807 c189 pq=0 df`000000 ql=0 pa=0 f:
htb*c10234 m=2 t2119 c040 pq=0 df`000000 ql=0 pa=0 f:
htb*c10243 m=2 t7807 c189 pq=0 df`000000 ql=0 pa=0 f:
htb*c10666 m=2 tB09 cB09 pq=0 df6496 ql=0 pa=0 f:
htb*c10053 m=2 tD3199 cD3199 pq=0 dfa11232 ql=0 pa=0 f:
htb*c10006 m=2 t8099 c189 pq=0 df`000000 ql=0 pa=0 f:
htb*c10116 m=2 t7807 c189 pq=0 df`000000 ql=0 pa=0 f:
htb*c10226 m=2 t2119 c040 pq=0 df`000000 ql=0 pa=0 f:
htb*c10237 m=2 t=-44811 c740 pq=0 df�92 ql=0 pa=0 f:
htb*c10240 m=2 t8845 c690 pq=0 df`000000 ql=0 pa=0 f:
htb*c10106 m=2 t2119 c040 pq=0 df`000000 ql=0 pa=0 f:
htb*c10227 m=2 t2119 c040 pq=0 df`000000 ql=0 pa=0 f:
htb*c10236 m=2 t7807 c189 pq=0 df`000000 ql=0 pa=0 f:
htb*c10241 m=2 t7807 c189 pq=0 df`000000 ql=0 pa=0 f:
htb*c10250 m=2 t=-84557 c„65 pq=0 df�92 ql=0 pa=0 f:
htb*c10228 m=2 t=-7675 c)17 pq=0 df�92 ql=0 pa=0 f:
htb*c10239 m=2 t7807 c189 pq=0 df`000000 ql=0 pa=0 f:
htb*c10229 m=2 t=-127349 c„65 pq=0 df�92 ql=0 pa=0 f:
htb*c10238 m=2 t7807 c189 pq=0 df`000000 ql=0 pa=0 f:
htb*c10192 m=2 t8845 c690 pq=0 df87840 ql=0 pa=0 f:
htb*c10248 m=2 t6697 c040 pq=0 df`000000 ql=0 pa=0 f:
HTB init, kernel part version 3.7
htb*g j20407
htb*r7 m=0
htb*r6 m=0
htb*r5 m=0
htb*r4 m=0
htb*r3 m=0
htb*r2 m=0
htb*r1 m=0
htb*r0 m=0
My script for eth1 looks like this:
#!/bin/sh
TTRATE'50kbit
TRATE 48kbit
echo "delete!"
tc qdisc del dev eth1 root 2>/dev/null >/dev/null
echo "add qdisc..."
tc qdisc add dev eth1 root handle 1: htb default 99 r2q 2
#atention!!! sum(child rate) <= parent rates !!!!
echo "add classes..."
tc class add dev eth1 parent 1: classid 1:1 htb rate $TTRATE ceil $TTRATE
#clasa www facuta de PALI !!!!!!!
tc class add dev eth1 parent 1: classid 1:666 htb rate 502kbit ceil 502kbit
#ssh class pt conexiuni intre calc din retea si server
tc class add dev eth1 parent 1: classid 1:222 htb rate 1024kbit ceil 1024kbit
#Counter Strike
tc class add dev eth1 parent 1: classid 1:27 htb rate 200Kbit ceil 200kbit
#ICMP class
tc class add dev eth1 parent 1: classid 1:11 htb rate 16kbit ceil 16kbit #DNS class
tc class add dev eth1 parent 1: classid 1:53 htb rate 16kbit ceil 16kbit
#rdc class
tc class add dev eth1 parent 1:1 classid 1:6 htb rate 64Kbit ceil $TRATE prio 1
#other parent
DOWN52 #640
tc class add dev eth1 parent 1:1 classid 1:2 htb rate $[DOWN]Kbit ceil $TRATE prio 3
#badboys classes
N2 #31 + 1(default) = 31(cu tot cu nerutabile)
RATE=$[(9*$DOWN)/(10*$N)]
echo "$[RATE]Kbit / class"
tc class add dev eth1 parent 1:2 classid 1:102 htb rate $[RATE]Kbit ceil $TRATE prio 3 #192.168.10.2
tc class add dev eth1 parent 1:2 classid 1:105 htb rate $[RATE]Kbit ceil $TRATE prio 3 #192.168.10.5
tc class add dev eth1 parent 1:2 classid 1:106 htb rate $[RATE]Kbit ceil $TRATE prio 3 #192.168.10.6
tc class add dev eth1 parent 1:2 classid 1:115 htb rate $[RATE]Kbit ceil $TRATE prio 3 #192.168.11.5
tc class add dev eth1 parent 1:2 classid 1:116 htb rate $[RATE]Kbit ceil $TRATE prio 3 #192.168.11.6
tc class add dev eth1 parent 1:2 classid 1:192 htb rate $[RATE]Kbit ceil $TRATE prio 3 #192.168.10.3,4 192.168.11.2,3,4 neimportanti tc class add dev eth1 parent 1:2 classid 1:226 htb rate $[RATE]Kbit ceil $TRATE prio 3 #226
tc class add dev eth1 parent 1:2 classid 1:227 htb rate $[RATE]Kbit ceil $TRATE prio 3 #227
tc class add dev eth1 parent 1:2 classid 1:228 htb rate $[RATE]Kbit ceil $TRATE prio 3 #228
tc class add dev eth1 parent 1:2 classid 1:229 htb rate $[RATE]Kbit ceil $TRATE prio 3 #229
tc class add dev eth1 parent 1:2 classid 1:230 htb rate $[RATE]Kbit ceil $TRATE prio 3 #230
tc class add dev eth1 parent 1:2 classid 1:231 htb rate $[RATE]Kbit ceil $TRATE prio 3 #231
tc class add dev eth1 parent 1:2 classid 1:232 htb rate $[RATE]Kbit ceil $TRATE prio 3 #232
tc class add dev eth1 parent 1:2 classid 1:233 htb rate $[RATE]Kbit ceil $TRATE prio 3 #233
tc class add dev eth1 parent 1:2 classid 1:234 htb rate $[RATE]Kbit ceil $TRATE prio 3 #234
tc class add dev eth1 parent 1:2 classid 1:235 htb rate $[RATE]Kbit ceil $TRATE prio 3 #235
tc class add dev eth1 parent 1:2 classid 1:236 htb rate $[RATE]Kbit ceil $TRATE prio 3 #236
tc class add dev eth1 parent 1:2 classid 1:237 htb rate $[RATE]Kbit ceil $TRATE prio 3 #237
tc class add dev eth1 parent 1:2 classid 1:238 htb rate $[RATE]Kbit ceil $TRATE prio 3 #238
tc class add dev eth1 parent 1:2 classid 1:239 htb rate $[RATE]Kbit ceil $TRATE prio 3 #239
tc class add dev eth1 parent 1:2 classid 1:240 htb rate $[RATE]Kbit ceil $TRATE prio 3 #240
tc class add dev eth1 parent 1:2 classid 1:241 htb rate $[RATE]Kbit ceil $TRATE prio 3 #241
tc class add dev eth1 parent 1:2 classid 1:242 htb rate $[RATE]Kbit ceil $TRATE prio 3 #242
tc class add dev eth1 parent 1:2 classid 1:243 htb rate $[RATE]Kbit ceil $TRATE prio 3 #243
tc class add dev eth1 parent 1:2 classid 1:244 htb rate $[RATE]Kbit ceil $TRATE prio 3 #244
#tc class add dev eth1 parent 1:2 classid 1:245 htb rate $[RATE]Kbit ceil $TRATE prio 3 #245 !!! ip e luat, numai ca am bagat-o in clasa cu 236 --> vezi filtru
tc class add dev eth1 parent 1:2 classid 1:246 htb rate $[RATE]Kbit ceil $TRATE prio 3 #246
tc class add dev eth1 parent 1:2 classid 1:247 htb rate $[RATE]Kbit ceil $TRATE prio 3 #247
tc class add dev eth1 parent 1:2 classid 1:248 htb rate $[RATE]Kbit ceil $TRATE prio 3 #248
#tc class add dev eth1 parent 1:2 classid 1:249 htb rate $[RATE]Kbit ceil $TRATE prio 3 #236
tc class add dev eth1 parent 1:2 classid 1:250 htb rate $[RATE]Kbit ceil $TRATE prio 3 #250
#tc class add dev eth1 parent 1:2 classid 1:251 htb rate $[RATE]Kbit ceil $TRATE prio 3 #250 vezi mai sus ....sunt in 250 vezi filtrele #tc class add dev eth1 parent 1:2 classid 1:252 htb rate $[RATE]Kbit ceil $TRATE prio 3 #250
tc class add dev eth1 parent 1:2 classid 1:253 htb rate $[RATE]Kbit ceil $TRATE prio 3 #253
tc class add dev eth1 parent 1:2 classid 1:254 htb rate $[RATE]Kbit ceil $TRATE prio 3 #254
#default class
tc class add dev eth1 parent 1:2 classid 1:99 htb rate $[RATE]Kbit ceil $TRATE prio 3 #0
echo "add filters..."
#icmp
tc filter add dev eth1 parent 1:0 protocol ip prio 1 u32 \
match u8 0x01 0xff at 9 \
flowid 1:11
#DNS
tc filter add dev eth1 parent 1:0 protocol ip prio 1 u32 \
match ip sport 53 0xff \
flowid 1:53
#WWW creata de PALI !!!!!!!!!!!!!!
tc filter add dev eth1 parent 1:0 protocol ip prio 3 u32 match ip sport \
80 0xffff flowid 1:666
#Counter Strike
tc filter add dev eth1 parent 1:0 protocol ip prio 2 u32 match ip sport \
27015 0xffff flowid 1:27
#rdc
tc filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip dport \
5901 0xffff flowid 1:6
tc filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip sport \
5901 0xffff flowid 1:6
tc filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip sport \
3389 0xffff flowid 1:6
tc filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip dport \
3389 0xffff flowid 1:6
#ssh dinspre reta spre server
tc filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip sport \
22 0xffff flowid 1:222
#Clinets filters
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
192.168.10.2 flowid 1:102
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
192.168.10.3 flowid 1:192
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
192.168.10.4 flowid 1:192
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
192.168.10.5 flowid 1:105
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
192.168.10.6 flowid 1:106
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
192.168.11.2 flowid 1:192
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
192.168.11.3 flowid 1:192
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
192.168.11.4 flowid 1:192
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
192.168.11.5 flowid 1:115
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
192.168.11.6 flowid 1:116
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
81.196.113.226 flowid 1:226
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
81.196.113.227 flowid 1:227
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
81.196.113.228 flowid 1:228
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
81.196.113.229 flowid 1:229
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
81.196.113.230 flowid 1:230
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
81.196.113.231 flowid 1:231
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
81.196.113.232 flowid 1:232
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
81.196.113.233 flowid 1:233
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
81.196.113.234 flowid 1:234
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
81.196.113.235 flowid 1:235
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
81.196.113.236 flowid 1:236
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
81.196.113.237 flowid 1:237
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
81.196.113.238 flowid 1:238
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
81.196.113.239 flowid 1:239
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
81.196.113.240 flowid 1:240
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
81.196.113.241 flowid 1:241
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
81.196.113.242 flowid 1:242
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
81.196.113.243 flowid 1:243
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
81.196.113.244 flowid 1:244
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
81.196.113.245 flowid 1:236
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
81.196.113.246 flowid 1:246
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
81.196.113.247 flowid 1:247
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
81.196.113.248 flowid 1:248
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
81.196.113.249 flowid 1:236
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
81.196.113.250 flowid 1:250
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
81.196.113.251 flowid 1:250
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
81.196.113.252 flowid 1:250
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
81.196.113.253 flowid 1:253
tc filter add dev eth1 parent 1:0 protocol ip prio 4 u32 match ip dst \
81.196.113.254 flowid 1:254
echo "add leaf qdisc..."
#tc qdisc add dev eth1 parent 1:102 handle 102: sfq perturb 2 #tc qdisc add dev eth1 parent 1:105 handle 105: sfq perturb 2 #tc qdisc add dev eth1 parent 1:106 handle 106: sfq perturb 2 #tc qdisc add dev eth1 parent 1:115 handle 115: sfq perturb 2 #tc qdisc add dev eth1 parent 1:116 handle 116: sfq perturb 2 tc qdisc add dev eth1 parent 1:192 handle 192: sfq perturb 2 #tc qdisc add dev eth1 parent 1:226 handle 226: sfq perturb 2 #tc qdisc add dev eth1 parent 1:227 handle 227: sfq perturb 2 #tc qdisc add dev eth1 parent 1:228 handle 228: sfq perturb 2 #tc qdisc add dev eth1 parent 1:229 handle 229: sfq perturb 2 #tc qdisc add dev eth1 parent 1:230 handle 230: sfq perturb 2 #tc qdisc add dev eth1 parent 1:231 handle 231: sfq perturb 2 #tc qdisc add dev eth1 parent 1:232 handle 232: sfq perturb 2 #tc qdisc add dev eth1 parent 1:233 handle 233: sfq perturb 2 #tc qdisc add dev eth1 parent 1:234 handle 234: sfq perturb 2 #tc qdisc add dev eth1 parent 1:235 handle 235: sfq perturb 2 tc qdisc add dev eth1 parent 1:236 handle 236: sfq perturb 2 #tc qdisc add dev eth1 parent 1:237 handle 237: sfq perturb 2 #tc qdisc add dev eth1 parent 1:238 handle 238: sfq perturb 2 #tc qdisc add dev eth1 parent 1:239 handle 239: sfq perturb 2 #tc qdisc add dev eth1 parent 1:240 handle 240: sfq perturb 2 #tc qdisc add dev eth1 parent 1:241 handle 241: sfq perturb 2 #tc qdisc add dev eth1 parent 1:242 handle 242: sfq perturb 2 #tc qdisc add dev eth1 parent 1:243 handle 243: sfq perturb 2 #tc qdisc add dev eth1 parent 1:244 handle 244: sfq perturb 2 #tc qdisc add dev eth1 parent 1:245 handle 245: sfq perturb 2 #tc qdisc add dev eth1 parent 1:246 handle 246: sfq perturb 2 #tc qdisc add dev eth1 parent 1:247 handle 247: sfq perturb 2 #tc qdisc add dev eth1 parent 1:248 handle 248: sfq perturb 2 #tc qdisc add dev eth1 parent 1:249 handle 249: sfq perturb 2 tc qdisc add dev eth1 parent 1:250 handle 250: sfq perturb 2 #tc qdisc add dev eth1 parent 1:251 handle 251: sfq perturb 2 #tc qdisc add dev eth1 parent 1:252 handle 252: sfq perturb 2 #tc qdisc add dev eth1 parent 1:253 handle 253: sfq perturb 2 #tc qdisc add dev eth1 parent 1:254 handle 254: sfq perturb 2
tc qdisc add dev eth1 parent 1:666 handle 666: sfq perturb 2
tc qdisc add dev eth1 parent 1:99 handle 99: sfq perturb 2
----- Original Message -----
From: "Martin Devera" <[email protected]>
To: <[email protected]>
Cc: <[email protected]>
Sent: 03 July, 2003 13:30 PM
Subject: RE:RE:[LARTC] HTB Kernel log (cl && cl->un.leaf.q->q.qlen)
Quoted 11 lines
you should provide more info, version, script ..
Quoted 6 lines · On Thu, 3 Jul 2003 [email protected] wrote:
Did someone solve this problem?
I receive this error (on dmesg) when I launch my script for eth1:KERNEL: assertion (cl &&
cl->un.leaf.q->q.qlen) failed atsch_htb.c(959)Why ?????
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Ok, try please 2.4.21. Also can you trigger the bug often or only sometimes ? Does it depend on traffic ? I'm looking how to reproduce it here ..
Quoted 5 lines · On Thu, 3 Jul 2003 [email protected] wrote:
OK No problem!
I'm useing Slack 9.0/2.4.20( AMD K6 2-333Mhz with RAM 128MB) with HTB from kernel...and U32 filters!
/* How can I tweak bash or something ...to get high histoy on Shift+PageUP and a higher bashhistory, too */
Quoted 8 lines
The dmesg paste:
KERNEL: assertion (cl &&cl->un.leaf.q->q.qlen) failed atsch_htb.c(959)
KERNEL: assertion (cl &&cl->un.leaf.q->q.qlen) failed atsch_htb.c(959)
KERNEL: assertion (cl &&cl->un.leaf.q->q.qlen) failed atsch_htb.c(959)
KERNEL: assertion (cl &&cl->un.leaf.q->q.qlen) failed atsch_htb.c(959)
KERNEL: assertion (cl &&cl->un.leaf.q->q.qlen) failed atsch_htb.c(959)
KERNEL: assertion (cl &&cl->un.leaf.q->q.qlen) failed atsch_htb.c(959)
eth0: Promiscuous mode enabled.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
yes I think it depends on traffic...
but why this?
PS
1) http://qos.dyndns.org:3389/cgi-bin/fom?file@ what should I use on my K6 ??? default it's PSCHED_JIFFIES, i think!!
2) http://qos.dyndns.org:3389/cgi-bin/fom?fileV those filter destroy patches are applyed in 2.4.21 ??
3) http://qos.dyndns.org:3389/cgi-bin/fom?file! What SFQ latency should I use?
SFQ qdisc has a default queue length of 128 packets!!!!
Or shuld I use ESFQ...
Please advise me with this problems!!
Thank you
Quoted 3 lines
Ok, try please 2.4.21. Also can you trigger the bug often or only sometimes ? Does it depend on traffic ? I'm looking how to reproduce it here ..
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
On kernel 2.4.18 through 20 I could reproduce this by deleting my root qdiscs and re-creating them every minute. I have since moved over to a different way of counting the packets so I no longer do this and the messages stopped.
Quoted 3 lines · you
Ok, try please 2.4.21. Also can you trigger the bug often or only sometimes ? Does it depend on traffic ? I'm looking how to reproduce it here ..
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
I don't understand what u meen!Can you explain more detailed please!I'm from ROMANIA and my english it's a little poor!
What should I understand from this phrase "I have since moved over to a different way of counting the packets so I no longer do this and the messages stopped."
Thanx
----- Original Message -----
From: "David Watson" <[email protected]>
To: <[email protected]>
Sent: 03 July, 2003 15:48 PM
Subject: Re: RE:RE:[LARTC] HTB Kernel log (cl && cl->un.leaf.q->q.qlen)
Quoted 6 lines
On kernel 2.4.18 through 20 I could reproduce this by deleting my root qdiscs and re-creating them every minute. I have since moved over to a different way of counting the packets so I no longer do this and the messages stopped.
Quoted 8 lines
Quoted 3 lines · you
Ok, try please 2.4.21. Also can you trigger the bug often or only sometimes ? Does it depend on traffic ? I'm looking how to reproduce it here ..
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/