Skip to contentSkip to conversation

HTB + BRIDGE QUESTION!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! HELP!!!!!!!!!!!

LARTC tanxuey 2 participants 2 messages Jul 18, 2003

lore
Share & tools
lore

tanxuey

author
#0 lore raw

Hi everybody!

I am very glad to get htb test information from www.docum.org for the htb performance.

Today, I setup a bridge using brctl. my setup as following:

    192.168.2.26 |              |             |
                 |------------- | HTB+BR box  |-------- 192.168.2.18
                 |       eth0   |             | eth1
    192.168.2.29 |              |             |

I want to limit the traffics when i download data from 192.168.2.18 to 26 or 29. My script as following:

tc qdisc add dev eth0 root handle 1: htb default 10

tc class add dev eth0 parent 1:0 classid 1:1 htb rate 10Mbit
tc class add dev eth0 parent 1:1 classid 1:10 htb rate 1Mbit ceil 10Mbit prio 1 tc class add dev eth0 parent 1:1 classid 1:11 htb rate 7Mbit ceil 10Mbit prio 2 tc class add dev eth0 parent 1:1 classid 1:12 htb rate 2Mbit ceil 10Mbit prio 3

tc filter add dev eth0 parent 1:0 protocol ip prio 10 u32 match ip dst 192.168.2.26/32 flowid 1:11 tc filter add dev eth0 parent 1:0 protocol ip prio 10 u32 match ip dst 192.168.2.29/32 flowid 1:12

26 download from 18,26 can get 900kbytes/s, but 26 and 29 download simultaneously, 26 get 400kbytes/s while 29 get 500kbytes/s .

i do not know why

any idea any sugestion ! please tell me, I really appreciate your help!!!

#1 lore raw

Re: [LARTC] HTB + BRIDGE QUESTION!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

In a bridge you must have also some classes an filters on the second ethernet interface.
by having the same classes for both network interfaces and to specify filters to classify the traffic you can control both incomming and outgoing traffic.
In your policy if you want to limit the traffic to 1Mbit you have to specify also the same amount as ceil cause ceil specifies the amount of bandwidth that a class can allocate but when is needed from some other class then it will be deallocated. Thus you saw too fast downloads. If you have rate and ceil exactly the same then you make the guarateed to be the only traffic that must be allocated.

Quoted 19 lines · tanxuey

Hi everybody!
I am very glad to get htb test information from *www.docum.org*
<http://www.docum.org> for the htb performance. Today, I setup a bridge using brctl. my setup as following:
192.168.2.*26* | | |

|------------- | HTB+BR box |-------- 192.168.2.*18*
| eth0 | | eth1
192.168.2.*29* | | |

I want to limit the traffics when i download data from 192.168.2.18 to *26* or *29*.
My script as following:
tc qdisc add dev eth0 root handle 1: htb default 10
tc class add dev eth0 parent 1:0 classid 1:1 htb rate 10Mbit tc class add dev eth0 parent 1:1 classid 1:10 htb rate 1Mbit ceil 10Mbit prio 1
tc class add dev eth0 parent 1:1 classid 1:11 htb rate 7Mbit ceil 10Mbit prio 2
tc class add dev eth0 parent 1:1 classid 1:12 htb rate 2Mbit ceil 10Mbit prio 3

Quoted 8 lines

tc filter add dev eth0 parent 1:0 protocol ip prio 10 u32 match ip dst 192.168.2.26/32 flowid 1:11
tc filter add dev eth0 parent 1:0 protocol ip prio 10 u32 match ip dst 192.168.2.29/32 flowid 1:12
*26* download from *18*,26 can get 900kbytes/s, but 26 and 29 download simultaneously, 26 get *400kbytes*/s while 29 get 500kbytes/s . i do not know why
any idea any sugestion ! please tell me, I really appreciate your help!!!

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/