Shape both incoming and outgoing traffic with HTB ?
Dear all,
I want to shape both incoming and outgoing traffic with HTB. Since the first time i applied HTB, i only limit incoming traffic from internet, while the outgoing traffic is unlimited and now these days my outgoing traffic really getting higher.
INTERNET ----- eth0 | BW.MANAGER | eth1 --- LAN
#!/bin/sh
tc qdisc del dev eth0 root
tc qdisc del dev eth1 root
tc qdisc add dev eth1 root handle 1 htb default 0 r2q 50
tc class add dev eth1 parent 1: classid 1:2 htb rate 120Kbit ceil 120Kbit tc qdisc add dev eth1 parent 1:2 handle 2 sfq perturb 10 quantum 1500 tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip src 0.0.0.0/0 match ip dst 192.168.0.0/19 classid 1:2
tc qdisc add dev eth0 root handle 2 htb default 0 r2q 50
tc qdisc add dev eth0 parent 2:10 handle 10 sfq perturb 10 quantum 1500 tc class add dev eth0 parent 2: classid 2:10 htb rate 20Kbit ceil 20Kbit tc filter add dev eth0 parent 2:0 protocol ip prio 100 u32 match ip src 192.168.0.0/19 match ip dst 0.0.0.0/0 classid 2:10
#End of script
I applied, but none of outgoing traffic match class 2:10 I need help about this,
Regards,
Rio Martin.
-
"When in doubt, tell the truth."
-- Mark Twain
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hello Rio Martin,
: I want to shape both incoming and outgoing traffic with HTB. Since the : first time i applied HTB, i only limit incoming traffic from internet, : while the outgoing traffic is unlimited and now these days my outgoing : traffic really getting higher.
:
: INTERNET ----- eth0 | BW.MANAGER | eth1 --- LAN
This is not an uncommon problem for masquerading or SNATting hosts. In short, your upload traffic has already been masqueraded/SNATted, so you no longer have a source IP of 192.168.0.0/19.
The best thing to do is to use fwmark to mark the traffic with iptables/ipchains (whichever you are using) and classify the outbound traffic according to the fwmark. See the LARTC documentation on this topic [1].
-Martin
[1] http://lartc.org/howto/lartc.qdisc.filters.html#LARTC.FILTERING.SIMPLE
Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 9 lines · Martin A. Brown
Hello Rio Martin,
: I want to shape both incoming and outgoing traffic with HTB. Since the : first time i applied HTB, i only limit incoming traffic from internet, : while the outgoing traffic is unlimited and now these days my outgoing : traffic really getting higher.
: INTERNET ----- eth0 | BW.MANAGER | eth1 --- LAN
This is not an uncommon problem for masquerading or SNATting hosts. In short, your upload traffic has already been masqueraded/SNATted, so you no longer have a source IP of 192.168.0.0/19.
Yes, you re right.
I tried entering my public ip for the match ip src, and it goes smoothly shaped.
Quoted 4 lines
The best thing to do is to use fwmark to mark the traffic with iptables/ipchains (whichever you are using) and classify the outbound traffic according to the fwmark. See the LARTC documentation on this topic [1].
Yes i realized that if i didnt use fwmark, it will be hard to manage outgoing traffic from all different network i managed down here.
Thanks ..
Regards,
Rio Martin.
Signature · 7 lines
43rd Law of Computing: Anything that can go wr fortune: Segmentation violation -- Core dumped _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/