Skip to contentSkip to conversation

rsvpd

LARTC Burnside, Andrew 3 participants 3 messages Jul 24, 2003 – Jul 25, 2003

lore
Share & tools
lore
#1 lore raw

Try the ISI version...we were using it for about two years over RH 6.2/7.x until recently.

And it normally will not depend on you kernel version since all 2.4.x kernels had traffic control support. It is a userspace daemon.

/Amit

Quoted 13 lines · Andrew

Hello

Has anyone had any luck compiling rsvpd recently?
I am trying to decide whether to use the ISI version or KOM-RSVP.

I am running kernel 2.4.20.

Cheers

Andrew
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Signature · 4 lines
----------------------------------------------------------------------
Amit Kucheria          akucheria@<NOSPAM>metricsystems.com
Metric Systems Corp.   2320 Cousteau Court, Suite 201, Vista, CA 92083
----------------------------------------------------------------------
#2 lore raw
In reply to Burnside, Andrew

Yes, I did it using 2.4.18-2.4.21 kernels.
You have to use ftp://ftp.isi.edu/rsvp/release/rsvpd.rel4.2a4-1.tar.gz and apply the patch that has been supplied by Craig Rodrigues from BBN to compile under RedHat Linux 6.2 and 7.0. ftp://ftp.isi.edu/rsvp/release/rsvp.patch.txt
For the link to the kernel traffic control use Alexey Kunetsov's traffic control adaptation module ftp://ftp.isi.edu/rsvp/release/linux-tc.tar.gz (don't' forget to change Makefile to activate it - by default rsvpd uses testing stub)

Dimitry

-----Original Message-----
From: Burnside, Andrew [mailto:[email protected]]

Has anyone had any luck compiling rsvpd recently?
I am trying to decide whether to use the ISI version or KOM-RSVP.

I am running kernel 2.4.20.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/