Skip to contentSkip to conversation

help on Layer 7 with TC

LARTC hare ram 3 participants 3 messages Jul 28, 2003

lore
Share & tools
lore

hare ram

author
#0 lore raw

Hi

i have seen your post in news group that layer 7 filtering can be used with TC

iam trying to deploy layer 7 in RH 9.0
which got a kernel of 2.4.20 i have upgraded to 2.4.20-19 now

but the Layer 7 available for only 2.5 and above
how can i use this patch for 2.4.20-19

does any one have clue for the same or any other Patch i can get to deploy with 2.4.20

help will be appreciate

hare

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

I found some time ago that the u32 classifier can read any part of a packet - header and/or data section using the byte offset facility and action on match. If I understand correct, the Layer 7 filter patch does the same as P2P applications use the same ports as many other services but the payload is different. The filter has payload patterns that it searches for to identify the application. Maybe the Layer 7 filter patch searches without byte offset - meaning a substring kind of search and uses the boolean outcome for action trigger. Can this be then done using the u32 filter itself?

Mohan

-----Original Message-----
From: [email protected] [mailto:[email protected]]On Behalf Of hare ram
Sent: Monday, July 28, 2003 12:56 PM
To: [email protected]
Subject: [LARTC] help on Layer 7 with TC

Hi

i have seen your post in news group that layer 7 filtering can be used with TC

iam trying to deploy layer 7 in RH 9.0
which got a kernel of 2.4.20 i have upgraded to 2.4.20-19 now

but the Layer 7 available for only 2.5 and above
how can i use this patch for 2.4.20-19

does any one have clue for the same or any other Patch i can get to deploy with 2.4.20

help will be appreciate

hare

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to hare ram
Quoted 9 lines · S Mohan

I found some time ago that the u32 classifier can read any part of a packet - header and/or data section using the byte offset facility and action on match. If I understand correct, the Layer 7 filter patch does the same as P2P applications use the same ports as many other services but the payload is different. The filter has payload patterns that it searches for to identify the application. Maybe the Layer 7 filter patch searches without byte offset - meaning a substring kind of search and uses the boolean outcome for action trigger. Can this be then done using the u32 filter itself?

Yes and no. It can maybe be done, but the l7 fitlering has a /proc interface to update the patterns.
You can also use iptables to search for patterns and mark the packets.

But the l7 filter is smart. It only examines the first 7 packets of a connection to find out the type. The other packets are considered as data. This can be done because it can get the conntrack information from the kernel, so it knows which packets belongs to which connection.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/