Skip to contentSkip to conversation

Two ADSL lines with PPPoE in one server.

LARTC Rokas 2 participants 2 messages Aug 8, 2003

lore
Share & tools
lore

Rokas

author
#0 lore raw

Hello,

My system is:
Server with Slackware 8.1 LINUX, ADSL Internet with PPPoE connection, and I masquerade my LAN. I use "Roaring Penguin" PPPoE client for my ADSL connection.

I would like to connect another ADSL line (also PPPoE) to my server and have two lines, because I want to make "Simple source policy routing", as described in LARTC HOWTO.

How should I set up my "Roaring Penguin" PPPoE client (or maybe other, if it's necessary) to support two ADSL lines (two PPPoE interfaces) ??? And is it possible to connect two PPPoE lines into one server ???

So my goal is to have two working interfaces: ppp0 and ppp1, then I will be able to do advanced routing...

Thank you,

Rokas Zakarevicius

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 3 lines · Rokas

I would like to connect another ADSL line (also PPPoE) to my server and have two lines, because I want to make "Simple source policy routing", as described in LARTC HOWTO.

google for "policy routing book." There is an example there.

Quoted 3 lines

How should I set up my "Roaring Penguin" PPPoE client (or maybe other, if it's necessary) to support two ADSL lines (two PPPoE interfaces) ??? And is it possible to connect two PPPoE lines into one server ???

just the same way you set up the first one.

Quoted 2 lines

So my goal is to have two working interfaces: ppp0 and ppp1, then I will be able to do advanced routing...

8-) good fun.

/steve

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/