Skip to contentSkip to conversation

Mixing classifiers

LARTC Marton Sandor 2 participants 3 messages Aug 13, 2003

lore
Share & tools
lore
#0 lore raw

Hi,

I tried using under a htb qdisc u32 filter for 1 class , and fw classifier for another but i get "RTNETLINK answers: Invalid argument" when i wanr ro insert the second type of classifier. Using either u32 alone or fw alone work, so can't be a kernel or tc problem ( 2.4.21-ac1, tc with htb patch). Looks like isn't allowed to mix different classifiers under the same qdisc , but i didn't find any reference to this in the man pages, or in the howto.
Can somebody confirm this behaviour and/or explain?

Thanks

Signature · 5 lines
 Marton Sandor  -  [email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw

Hi Marton,

Quoted 3 lines · * On Wed, Aug 13, 2003 at 05:44 AM (+0300), Marton Sandor wrote:

I tried using under a htb qdisc u32 filter for 1 class , and fw classifier for another but i get "RTNETLINK answers: Invalid argument" when i wanr ro insert the second type of classifier.

I don't get any error messages when starting a script like this one:

#!/bin/bash

TC=./tc
DEV=eth0
LAN2.168.1.0/24

$TC qdisc del dev $DEV root
$TC qdisc add dev $DEV root handle 1:0 htb

$TC class add dev $DEV parent 1:0 classid 1:1 htb rate 2048kbit $TC class add dev $DEV parent 1:0 classid 1:2 htb rate 4096kbit

$TC filter add dev $DEV parent 1:0 protocol ip prio 1 u32 match ip dst $LAN classid 1:1 $TC filter add dev $DEV parent 1:0 protocol ip prio 2 handle 5 fw classid 1:2

Quoted 2 lines

Using either u32 alone or fw alone work, so can't be a kernel or tc problem (2.4.21-ac1, tc with htb patch).

Here: "linux-2.4.21", tc binary which is available within [1].

Quoted 3 lines

Looks like isn't allowed to mix different classifiers under the same qdisc , but i didn't find any reference to this in the man pages, or in the howto. Can somebody confirm this behaviour and/or explain?

At least here it seems to function. Stupid question: Are you sure that your kernel supports the "fw" classifier?

Bye,
Steffen

[1] http://luxik.cdi.cz/~devik/qos/htb/v3/htb3.6-020525.tgz
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to Marton Sandor
Quoted 12 lines · Steffen Moser
Quoted 3 lines

I tried using under a htb qdisc u32 filter for 1 class , and fw classifier for another but i get "RTNETLINK answers: Invalid argument" when i wanr ro insert the second type of classifier.

I don't get any error messages when starting a script like this one:

#!/bin/bash

TC=./tc
DEV=eth0
LAN2.168.1.0/24

Quoted 8 lines

$TC qdisc del dev $DEV root
$TC qdisc add dev $DEV root handle 1:0 htb

$TC class add dev $DEV parent 1:0 classid 1:1 htb rate 2048kbit $TC class add dev $DEV parent 1:0 classid 1:2 htb rate 4096kbit

$TC filter add dev $DEV parent 1:0 protocol ip prio 1 u32 match ip dst $LAN classid 1:1 $TC filter add dev $DEV parent 1:0 protocol ip prio 2 handle 5 fw classid 1:2

Yes, this script work. I compared with my script and i observed that i get the error message only when i have the same prio for the filters. Try the fw filter with "prio 1 handle 5 fw"

Different prio's will solve my problem but still i'm curious

Signature · 5 lines
 Marton Sandor  -  [email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/