Ingress mode
Hi,
I would like to know whether can we do bandwidth management(traffic control) for incomming traffic to firewall.
For ex;- If my firewall WAN interface IP is 203.145.1.2 and any data from internet comming to 203.145.1.2 whether can be controlled...? If my total bandwidth= 512kb and I want to allocate 100kb to a LAN m/c with IP 192.168.1.2 for http traffic, how will I do it..?
-Raghu
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Raghuveer,
: I would like to know whether can we do bandwidth management(traffic : control) for incomming traffic to firewall. For ex;- If my firewall WAN : interface IP is 203.145.1.2 and any data from internet comming to : 203.145.1.2 whether can be controlled...? If my total bandwidth= 512kb : and I want to allocate 100kb to a LAN m/c with IP 192.168.1.2 for http : traffic, how will I do it..?
If your linux host is not the source or sink for any of the traffic, you can shape the inbound traffic on the inside interface of your bandwidth management box. If, however, the directly connected box is the source or sink for traffic, you'll need to look at other options.
I would suggest considering IMQ. (Search the archives.)
http://www.google.com/search?q=site%3Amailman.ds9a.nl+IMQ
http://www.google.com/search?q=site%3Amailman.ds9a.nl+IMQ+ingress
You can also use an ingress qdisc and a policer. (Search the archives.)
http://www.google.com/search?q=site%3Amailman.ds9a.nl+ingress+policer
And there's a recent posting on this topic:
http://mailman.ds9a.nl/pipermail/lartc/2003q3/009572.html
-Martin
Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Thanks Martin for valuable links, Iam going through it.
I want to apply traffic control rules for the incomming traffic to my firewall, which is what we call it as Ingress mode, am I right....? Just to confirm, suppose my firewall WAN interface is eth0 with IP 66.218.71.198 and LAN interface is eth1 with IP 192.168.1.2. So any traffic from Internet---->WAN is where I want to do traffic control for my LAN IP's. Hence amI right in saying that in ingress mode traffic control will be happening at eth0 interface(or ppp0 interface, WAN with ppp0 enabled).
I saw in the link documents that, for ingress we are using imq0, so how this will fit into my scenario...?. I understood that in ingress mode we have to drop the packets instead of queueing it like in egress mode, so is it going to have any effects other than latency...?
-Raghu
Quoted 21 lines · Martin A. Brown
Raghuveer,
: I would like to know whether can we do bandwidth management(traffic : control) for incomming traffic to firewall. For ex;- If my firewall WAN : interface IP is 203.145.1.2 and any data from internet comming to : 203.145.1.2 whether can be controlled...? If my total bandwidth= 512kb : and I want to allocate 100kb to a LAN m/c with IP 192.168.1.2 for http : traffic, how will I do it..?
If your linux host is not the source or sink for any of the traffic, you can shape the inbound traffic on the inside interface of your bandwidth management box. If, however, the directly connected box is the source or sink for traffic, you'll need to look at other options.
I would suggest considering IMQ. (Search the archives.)
http://www.google.com/search?q=site%3Amailman.ds9a.nl+IMQ
http://www.google.com/search?q=site%3Amailman.ds9a.nl+IMQ+ingressYou can also use an ingress qdisc and a policer. (Search the archives.)
Quoted 10 lines
http://www.google.com/search?q=site%3Amailman.ds9a.nl+ingress+policer
And there's a recent posting on this topic:
http://mailman.ds9a.nl/pipermail/lartc/2003q3/009572.html
-Martin
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi there Raghuveer,
Just a brief answer here.
: I want to apply traffic control rules for the incomming traffic to my : firewall, which is what we call it as Ingress mode, am I right....? : Just to confirm, suppose my firewall WAN interface is eth0 with IP : 66.218.71.198 and LAN interface is eth1 with IP 192.168.1.2. So any : traffic from Internet---->WAN is where I want to do traffic control for : my LAN IP's. Hence amI right in saying that in ingress mode traffic : control will be happening at eth0 interface(or ppp0 interface, WAN with : ppp0 enabled).
:
: I saw in the link documents that, for ingress we are using imq0, so how : this will fit into my scenario...?. I understood that in ingress mode : we have to drop the packets instead of queueing it like in egress mode, : so is it going to have any effects other than latency...?
If you are using the Internet-connected host simply as a routing, firewalling, masquerading and bandwidth controlling host, simply forget about using IMQ. Just shape the inbound traffic on your eth0 before you transmit it to the clients, and shape the outbound traffic on ppp0 (wan0?) before you transmit it to the Internet.
Best of luck,
-Martin
Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/