kernel panic when using imq/htb
I'm trying to configure a linux server that shapes both incoming and outgoing traffic. The problem is that I get a kernel panic ("Unable to handle kernel NULL pointer dereference at virtual address 0000003c...") everytime I load the traffic shaping rules and then try to edit a file with vim (!!??) via a remote connection using ssh.
I configured the server (RedHat 9) as follows:
1. Downloaded from www.kernel.org the 2.4.21 kernel sources and from www.netfilter.org the iptables 1.2.8 sources
2. Patched both kernel and iptables sources with IMQ patches, build and install both of them
3. Defined the following script:
#!/bin/sh
modprobe imq numdevs=1
tc qdisc add dev imq0 root handle 1: htb default 20 r2q 1 tc class add dev imq0 parent 1: classid 1:1 htb rate 256kbit ceil 256kbit
tc class add dev imq0 parent 1:1 classid 1:10 htb rate 25kbit ceil 256kbit
tc class add dev imq0 parent 1:1 classid 1:20 htb rate 231kbit ceil 256kbit
tc filter add dev imq0 protocol ip parent 1:0 prio 1 u32 match ip src 10.5.1.150 flowid 1:10
tc filter add dev imq0 protocol ip parent 1:0 prio 2 u32 match ip dst 10.5.1.150 flowid 1:10
iptables -t mangle -A POSTROUTING -o eth0 -j IMQ --todev 0 iptables -t mangle -A POSTROUTING -o eth1 -j IMQ --todev 0 iptables -t mangle -A PREROUTING -i eth0 -j IMQ --todev 0 ip link set imq0 up
4. The server's eth0 ip address is 10.5.220.220/16; I logon on to it (using ssh) from 10.5.1.150, then I try to edit (using vim) the script described in 3) and I get the kernel panic.
Anybody know what could be the cause of this strange behaviour? Are the rules defined above wrong?
Any hint/suggestion/etc will be welcome :)
Best wishes,
Toshiro.
Signature · 5 lines
Toshiro Viera <[email protected]> _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 7 lines · Toshiro Viera
4. The server's eth0 ip address is 10.5.220.220/16; I logon on to it (using ssh) from 10.5.1.150, then I try to edit (using vim) the script described in 3) and I get the kernel panic.
Anybody know what could be the cause of this strange behaviour? Are the rules defined above wrong?
Any hint/suggestion/etc will be welcome :)
I'm thinking one of two things, either
a) when you're ssh'ed in, and then open vim, it sends a certain (too much?) amount of traffic through whatever qdisc/class ssh goes through, and this is causing your kernel problem - try doing ls in a large directory, or cat'ting a largish text file. does the panic still occur ?
b) you've got some bug in your kernel and/or vim, that's only evident when you've loaded the imq modules - try running vim in the same circumstance with the imq module loaded, but no queues setup, then add one at a time.
good luck.
Signature · 10 lines
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Damion de Soto - Software Engineer email: [email protected] SnapGear --- ph: +61 7 3435 2809 | Custom Embedded Solutions fax: +61 7 3891 3630 | and Security Appliances web: http://www.snapgear.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 10 lines · Damion de Soto
Quoted 7 lines · Toshiro Viera
4. The server's eth0 ip address is 10.5.220.220/16; I logon on to it (using ssh) from 10.5.1.150, then I try to edit (using vim) the script described in 3) and I get the kernel panic.
Anybody know what could be the cause of this strange behaviour? Are the rules defined above wrong?
Any hint/suggestion/etc will be welcome :)
Quoted 6 lines
I'm thinking one of two things, either
a) when you're ssh'ed in, and then open vim, it sends a certain (too much?) amount of traffic through whatever qdisc/class ssh goes through, and this is causing your kernel problem - try doing ls in a large directory, or cat'ting a largish text file. does the panic still occur ?
Yes, it still happens.
Signature · 5 lines
Toshiro Viera <[email protected]> _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/