Skip to contentSkip to conversation

64 commited / 128 burstable peak service

LARTC Damjan 2 participants 3 messages Sep 1, 2003

lore
Share & tools
lore

Damjan

author
#0 lore raw

I would like to give my customers a special 64/128 service. With this service you can:
- download at 64kbit/s all you like (unless...)
- you can have peaks up to 128kbit/s, but the peaks should not be longer than (say) 5 minutes, and then, after that you will have to wait your bucket to replenish in order to get the 64 commited rate.

The point is the average should never be above 64kbits, burstable peaks are allowed for some time, but it hurts your service.

I plan to implement this using HTB, since I'll have several customers, on one router, that will have this service...

Can this be done?
What parameters should I look for when setting HTB?

Signature · 5 lines
Damjan Georgievski
jabberID: [email protected]
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw
Quoted 11 lines · Damjan

I would like to give my customers a special 64/128 service. With this service you can:
- download at 64kbit/s all you like (unless...)
- you can have peaks up to 128kbit/s, but the peaks should not be longer than (say) 5 minutes, and then, after that you will have to wait your bucket to replenish in order to get the 64 commited rate.

The point is the average should never be above 64kbits, burstable peaks are allowed for some time, but it hurts your service.

Quoted 5 lines

I plan to implement this using HTB, since I'll have several customers, on one router, that will have this service...

Can this be done?
What parameters should I look for when setting HTB?

You can only do this with external monitoring and scripting. You can set some burst parameters with htb, but they are only for small burst. Not for big bursts like you want to do.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
author
#2 lore raw
In reply to Damjan
Quoted 11 lines
Quoted 11 lines

I would like to give my customers a special 64/128 service. With this service you can:
- download at 64kbit/s all you like (unless...)
- you can have peaks up to 128kbit/s, but the peaks should not be longer than (say) 5 minutes, and then, after that you will have to wait your bucket to replenish in order to get the 64 commited rate.

The point is the average should never be above 64kbits, burstable peaks are allowed for some time, but it hurts your service.

Quoted 8 lines
Quoted 5 lines

I plan to implement this using HTB, since I'll have several customers, on one router, that will have this service...

Can this be done?
What parameters should I look for when setting HTB?

You can only do this with external monitoring and scripting. You can set some burst parameters with htb, but they are only for small burst. Not for big bursts like you want to do.

Any such script in mind?? Does it exists?
If not, how should it work?

Signature · 5 lines
Damjan Georgievski
jabberID: [email protected]
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/