Ethloop
Hi,
This is my scenario
I have a 100mbit for 400 routes and the rest of Internet is at 2mbit
#
# 1:1
# / \
# 1:2 1:12
# / \
# 1:10 1:11
tc qdisc del dev lo root handle 1: htb default 10 tc qdisc add dev lo root handle 1: htb default 10
tc class add dev lo parent 1: classid 1:1 htb rate 100mbit quantum 1500
tc class add dev lo parent 1:1 classid 1:2 htb rate 1950kbit
tc class add dev lo parent 1:2 classid 1:10 htb rate 1500kbit ceil 1900kbit tc class add dev lo parent 1:2 classid 1:11 htb rate 100kbit ceil 1000kbit
tc class add dev lo parent 1:1 classid 1:12 htb rate 98mbit quantum 1500
tc qdisc add dev lo parent 1:10 handle 10: sfq perturb 10 tc qdisc add dev lo parent 1:11 handle 11: sfq perturb 10 tc qdisc add dev lo parent 1:12 handle 12: sfq perturb 10
Is my class Ok ?
I want to make simulation with Ethloop, How can I known which flow correspond to which classid ?
# lo will be used to TX and RX 0 i 0 lo 0 i 1 lo 0 i 2 lo
Thank you
Yves Bergeron
[email protected]
===============
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 35 lines · Yves Bergeron
Hi,
This is my scenario
I have a 100mbit for 400 routes and the rest of Internet is at 2mbit
#
# 1:1
# / \
# 1:2 1:12
# / \
# 1:10 1:11tc qdisc del dev lo root handle 1: htb default 10 tc qdisc add dev lo root handle 1: htb default 10
tc class add dev lo parent 1: classid 1:1 htb rate 100mbit quantum
1500tc class add dev lo parent 1:1 classid 1:2 htb rate 1950kbit
tc class add dev lo parent 1:2 classid 1:10 htb rate 1500kbit ceil
1900kbit tc class add dev lo parent 1:2 classid 1:11 htb rate 100kbit ceil 1000kbittc class add dev lo parent 1:1 classid 1:12 htb rate 98mbit quantum
1500tc qdisc add dev lo parent 1:10 handle 10: sfq perturb 10 tc qdisc add dev lo parent 1:11 handle 11: sfq perturb 10 tc qdisc add dev lo parent 1:12 handle 12: sfq perturb 10
Quoted 5 lines
Is my class Ok ?
I want to make simulation with Ethloop, How can I known which flow correspond to which classid ?
I use ethloop also and 0x10010 is class 1:10, 0x10011 is class 1:11. (ethloop is a tool that can be used to test htb, see htb home page).
Example :
tc qdisc del dev lo root
ifconfig lo mtu 1500
tc qdisc add dev lo root handle 1: htb default 10
TC="tc class add dev lo parent"
$TC 1: classid 1:1 htb rate 100kbps
$TC 1:1 classid 1:10 htb rate 40kbps ceil 100kbps $TC 1:1 classid 1:11 htb rate 60kbps ceil 100kbps
tc qdisc add dev lo parent 1:10 pfifo
tc qdisc add dev lo parent 1:11 pfifo
0 i 0 lo 0 i 1 lo 0 P 0 0x10010 0 P 1 0x10011 0 S 0 1500 0 S 1 1500 # start all flows 0 R 0 120k 0 R 1 120k 12000 X 0 0
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/