questions
Hey guys,
Im going to be setting up a qos system for the college I attend and I
had some questions. First, the box will be a transparent bridge and I would like to prioritize traffic (3 class/types only, [interactive, web+mail+etc, bulk]) and also limit single ips to specified up/down speeds. I want to use HTB.
1) the network here will have about 500-600 computers on the network,
with 400 active at any one time. Any ideas on what kind of hardware will be needed to accomodate this? They have given me a P-II 350 with 256Mb of RAM and 2 realtek based 10/100 NICs. Should this be enough?
2) What would be the most efficient way (qdisc/class structure) to
accomplish this? The school's main link is approx 6mbit, yet if I split that among the anticipated active computers, that would average about 15kbit per computer, which is terrible. So, that means if I want to allot any useful amount of bandwidth to all of the computers, my total alloted bandwidth would be greater than the link. Am I correct in my reasoning here? If so, what would all of you experienced shapers recommend for my setup? (tree diagrams, descriptions would be great)
3) iptables marking will not work over the bridge (correct?) so I need
to learn to use u32 filter classifiers. Are there any in depth howto's, etc out there? Im looking at the LARTC page on it and Im still pretty confused.
4) Anything else I should remember/consider?
Please CC replies to my address shad at wnoc dot com Jay
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 10 lines · Jay Wineinger
Hey guys,
Im going to be setting up a qos system for the college I attend and I
had some questions. First, the box will be a transparent bridge and I would like to prioritize traffic (3 class/types only, [interactive, web+mail+etc, bulk]) and also limit single ips to specified up/down speeds.
I want to use HTB.
1) the network here will have about 500-600 computers on the network,
with 400 active at any one time. Any ideas on what kind of hardware will be needed to accomodate this? They have given me a P-II 350 with 256Mb of RAM and 2 realtek based 10/100 NICs. Should this be enough?
It depends on the number of active classes you will have.
Quoted 8 lines
2) What would be the most efficient way (qdisc/class structure) to
accomplish this? The school's main link is approx 6mbit, yet if I split that among the anticipated active computers, that would average about 15kbit per computer, which is terrible. So, that means if I want to allot any useful amount of bandwidth to all of the computers, my total alloted bandwidth would be greater than the link. Am I correct in my reasoning here? If so, what would all of you experienced shapers recommend for my setup? (tree diagrams, descriptions would be great)
You can try to implement the wrr qdisc. This qdisc creates a class for each mac address (or ip address) and classify's the traffic. It can "punish" big downloaders by limiting the bandwidth.
http://wipl-wrr.sourceforge.net/
Quoted 4 lines
3) iptables marking will not work over the bridge (correct?) so I need
to learn to use u32 filter classifiers. Are there any in depth howto's, etc out there? Im looking at the LARTC page on it and Im still pretty confused.
You can use iptables on a bridge but you need some extra patches. See the faq page on docum.org.
Quoted 1 line
4) Anything else I should remember/consider?
Don't forget to monitor the link so you can check the setup.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/