CBQ.init
Quoted 8 lines
So I set CBQ.init following like this.
/etc/rc.d/CBQ.init
DEVICE=eth0,100Mbit,10Mbit
RATEMbit
WEIGHT=1Mbit
PRIO=5
Quoted 4 lines
When I set RATE=6Mbit,I can limit bandwidth 6Mbps. But I set RATE=7Mbit,8Mbit,...
I can limit bandwidth only 6.95Mbps everytime.
Why?
watch your default tbf settings!
----from cbq.init begin----
# BUFFER=<bytes>[/<bytes>] optional, default "10Kb/8"
#
# This parameter controls the depth of the token bucket. In other # words it represents the maximal burst size the class can send. # The optional part of parameter is used to determine the length # of intervals in packet sizes, for which the transmission times # are kept.
-----from cbq.init end-----
Quoted 1 line
Could you tell me how to limit bandwidth more than 7Mbps.
Try BUFFER0Kb/8
Signature · 12 lines
Catalin Petrescu <taz at dntis dot ro> -----BEGIN GEEK CODE BLOCK----- Version: 3.12 GCS/CC/IT/S/MU d- s+: a- C++ ULAS++++$ P+>+++ L+++ E- W+ N+ o? K? w-- O-- M- V? PS+ PE Y PGP+>++ t 5? X+ R? tv--() b+>++ DI++ D+ G e++ h* r-- y? ------END GEEK CODE BLOCK------ _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/