Skip to contentSkip to conversation

Dynamic bandwith

LARTC Alex 2 participants 2 messages Sep 9, 2003 – Sep 10, 2003

lore
Share & tools
lore

Alex

author
#0 lore raw

Hello,

I curently have setup bandwith limiting by using cbq.init script to limit about 100 workstations to a specific amount of bandwith, but I need to change that to a dynamic bandwith allocation.

I'm using a rh9 router with kernel 2.4.21 and I want to setup bandwith allocation dynamically between active users. If one needs more bandwith and it is available, he must be able to use it. In my curent setup if I have only one active user on network, his download/browsing speed can't increase, he will always be limmited at a specific rate.
I also have local traffic (metropolitan traffic - a couple of ip classes that some sites in my town are using and for which I have access at a greater speed than the speed for external traffic, the rest of internet). If it's necesary I will switch to HTB, it doesn't matter, the point is that I need to get this done and the docs that I found on the net are a little confusing.

I also need to prioritize interactive traffic (IRC and yahoo/msn messengers) and ICMP ping (to impress my boss :-) ).

The documentation has done nothing but to confuse me in this situation. Please help me with this!

Thank you in advance for any kind of help.

Alex

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 18 lines · Alex

Hello,

I curently have setup bandwith limiting by using cbq.init script to limit about 100 workstations to a specific amount of bandwith, but I need to change that to a dynamic bandwith allocation.

I'm using a rh9 router with kernel 2.4.21 and I want to setup bandwith allocation dynamically between active users. If one needs more bandwith and it is available, he must be able to use it. In my curent setup if I have only one active user on network, his download/browsing speed can't increase, he will always be limmited at a specific rate.
I also have local traffic (metropolitan traffic - a couple of ip classes that some sites in my town are using and for which I have access at a greater speed than the speed for external traffic, the rest of internet). If it's necesary I will switch to HTB, it doesn't matter, the point is that I need to get this done and the docs that I found on the net are a little confusing.

Quoted 5 lines

I also need to prioritize interactive traffic (IRC and yahoo/msn messengers) and ICMP ping (to impress my boss :-) ).

The documentation has done nothing but to confuse me in this situation. Please help me with this!

Try to create your own cbq setup and forget about cbq.init. Your setup is too complicated for cbq.init. If you use 2.4.21, you can use htb and not cbq. Much more easy to configure.

For docs, have you read my pages on http://docum.org ??

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/