RTP packet filtering
I havent't tested this, but it should work:
tc filter ... \ match ip protocol 17 0xff \ match u16 0x8000 0xffff at nexthdr + 8
The first match selects udp and the second selects the protocol information and payload type. Note that there is more info there than just the protocol version (no padding, no extension, no CSIDs). Also, why is the type 00?
Quoted 22 lines · Rafael Gustavo Gassner
Hi all,
I need to allow RTP packages on my network, but don´t want to
allow all UDP (And then ill try to priorize it), so i think i could do that using u32. I can see that all packages that are RTP have a field 80 00, as shown below (It is the protocol version and payload type):0000 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx 0010 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx 0020 xx xx xx xx xx xx xx xx xx xx 80 00 xx xx xx xxCould someone give me a tip on how should the u32 filter look like?
Thanks a lot,
Rafael Gustavo Gassner
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Signature · 3 lines
Lawrence MacIntyre 865.574.8696 [email protected] Oak Ridge National Laboratory High Performance Information Infrastructure Technology Group