htb errors, wrong patch?
I downloaded iproute2-2.4.7-now-ss010824.tar.gz and I did patched tc with the htb3.6_tc.diff from htb3.6-020525.tgz and when I try to use a htb script I get just errors. I did not patch the kernel, since I use kernel 2.4.21 and I saw on - HTB Homepage that I need to patch it only if I run version 2.4.20 or earlier. Do also need the kernel patch ? Or maybe is something else wrong?
RTNETLINK answers: No such file or directory Deleted old root disk on eth0
Unknown filter "flowid", hence option "1:10" is unparsable Unknown filter "flowid", hence option "1:2" is unparsable RTNETLINK answers: Invalid argument
RTNETLINK answers: Invalid argument
RTNETLINK answers: Invalid argument
RTNETLINK answers: Invalid argument
Thanks!
Alex
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 7 lines · Alex
I downloaded iproute2-2.4.7-now-ss010824.tar.gz and I did patched tc with the htb3.6_tc.diff from htb3.6-020525.tgz and when I try to use a htb script I get just errors. I did not patch the kernel, since I use kernel 2.4.21 and I saw on - HTB Homepage that I need to patch it only if I run version 2.4.20 or earlier. Do also need the kernel patch ? Or maybe is something else wrong?
Quoted 8 lines
RTNETLINK answers: No such file or directory Deleted old root disk on eth0
Unknown filter "flowid", hence option "1:10" is unparsable Unknown filter "flowid", hence option "1:2" is unparsable RTNETLINK answers: Invalid argument
RTNETLINK answers: Invalid argument
RTNETLINK answers: Invalid argument
RTNETLINK answers: Invalid argument
Can you post us your commands and do you have the htb qdisc enabled in your kernel config?
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
I have everything cbq/htb and all the QoS stuff compiled directly in the kernel, not as a module. The script is at
http://retea.hostingcenter.ro/htb.txt since is about 46k and is too big to post here.
Thanks.
Alex
----- Original Message -----
From: "Stef Coene" <[email protected]>
To: "Alex" <[email protected]>; "Lartc" <[email protected]>
Sent: Saturday, October 04, 2003 12:41 PM
Subject: Re: [LARTC] htb errors, wrong patch?
Quoted 2 lines · Alex
Quoted 1 line
I downloaded iproute2-2.4.7-now-ss010824.tar.gz and I did patched tc
with
Quoted 14 lines
Quoted 6 lines
the htb3.6_tc.diff from htb3.6-020525.tgz and when I try to use a htb script I get just errors. I did not patch the kernel, since I use kernel 2.4.21 and I saw on - HTB Homepage that I need to patch it only if I run version 2.4.20 or earlier. Do also need the kernel patch ? Or maybe is something else wrong?
Quoted 8 lines
RTNETLINK answers: No such file or directory Deleted old root disk on eth0
Unknown filter "flowid", hence option "1:10" is unparsable Unknown filter "flowid", hence option "1:2" is unparsable RTNETLINK answers: Invalid argument
RTNETLINK answers: Invalid argument
RTNETLINK answers: Invalid argument
RTNETLINK answers: Invalid argument
Quoted 1 line
Can you post us your commands and do you have the htb qdisc enabled in
your
Quoted 14 lines
kernel config?
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/