Skip to contentSkip to conversation

Bandwidth bounding in a Shared Channel (reused bandwidth)

LARTC Randolph Carter 2 participants 4 messages Oct 10, 2003

lore
Share & tools
lore
#0 lore raw

Sometimes (especially with DSL) in my location when you bought a channel say 128Kbps, there are some "peak" times when you can get even 256Kbps, and another times the channel can go down to least than 128Kbps(in that case the queuing discipline in the box would be doin't but nothing, and the queue would fall into the DSL router). When I used TC + HTB the users complain the speed has dramaticly decreased, and somehow they are right, the channel are not using the peaks(call bursts if you want). How can I do the queing discipline be aware of those changes, any idea; any suggestion?

This problem could be present also in the VSATs where the channel is shared, and the bandwidth allocated by use. Thanx in advance,

The new Congressmen say they're going to turn the government around. I hope I don't get run over again.
eject the proposal.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 9 lines · Randolph Carter

Sometimes (especially with DSL) in my location when you bought a channel say 128Kbps, there are some "peak" times when you can get even 256Kbps, and another times the channel can go down to least than 128Kbps(in that case the queuing discipline in the box would be doin't but nothing, and the queue would fall into the DSL router). When I used TC + HTB the users complain the speed has dramaticly decreased, and somehow they are right, the channel are not using the peaks(call bursts if you want). How can I do the queing discipline be aware of those changes, any idea; any suggestion?

This is allmot impossible to implement. You can not 'sense' the speed of the link on your shaping box in real time. And that's what you need.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Randolph Carter

Sure stef, no aproximation methods? some probabilistic/statistical approach to the problem?

"The two most common things in the universe are hydrogen and stupidity."

Quoted 13 lines · Stef Coene
Quoted 9 lines · Randolph Carter

Sometimes (especially with DSL) in my location when you bought a channel say 128Kbps, there are some "peak" times when you can get even 256Kbps, and another times the channel can go down to least than 128Kbps(in that case the queuing discipline in the box would be doin't but nothing, and the queue would fall into the DSL router). When I used TC + HTB the users complain the speed has dramaticly decreased, and somehow they are right, the channel are not using the peaks(call bursts if you want). How can I do the queing discipline be aware of those changes, any idea; any suggestion?

This is allmot impossible to implement. You can not 'sense' the speed of the link on your shaping box in real time. And that's what you need.

Quoted 8 lines

Stef

--
[email protected]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.openprojects.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to Randolph Carter
Quoted 2 lines · Randolph Carter

Sure stef, no aproximation methods? some probabilistic/statistical approach to the problem?

You can control the bandwidth even if you send more data then your modem can handle. But you will have less control then the situation of where YOU are the bottleneck.
To make sure YOU are the bottleneck, you need to kow the speed of the bottleneck of the link. So I'm afraid you are out of luck if you don't know the exact modem speed.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/