Skip to contentSkip to conversation

How to get router involved in QoS?

LARTC Vladimir Trebicky 2 participants 2 messages Oct 11, 2003 – Oct 13, 2003

lore
Share & tools
lore
#0 lore raw

Hi,

I have a router which QoSes traffic for local network (both in and
out direction). I would also download traffic generated by router to be involved in QoS. Link capacity is st about 800kbps and we shape it with htb to 512. Is it possible? Thanks,

--
Regards,
Vladimir Trebicky mailto:[email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 6 lines · Vladimir Trebicky

Hi,

I have a router which QoSes traffic for local network (both in and
out direction). I would also download traffic generated by router to be involved in QoS. Link capacity is st about 800kbps and we shape it with htb to 512. Is it possible? Thanks,

It's only possible if you know the difference between the normal traffic and the traffic generated on the box. If this box is also natting, you have a problem because the src ip address of all packets are rewritten.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/