Skip to contentSkip to conversation

'Help with routing'

LARTC Robert Kurjata 1 participant 1 message Oct 23, 2003

lore
Share & tools
lore
#0 lore raw

Witaj nixo,

W Twoim liœcie datowanym 22 paŸdziernika 2003 (20:13:29) mo¿na przeczytaæ:

Seems like I didn't read your posting deeply enough. Before I can help I need to know some more details.

Why are you using multipath default gateway? If you just need to make a proper routing for two separate lans going through one machine, not mixing them you should never use it. It's usefull for NAT-ed lan inside, not for public IP's. Just create simple routes without multipath. eth0 <-> eth1 and eth2 <-> eth3.

nnca> Thank you very much for the solution, but I still have a problem and I nnca> need help :) . The problem number one has been solved. When I trace from nnca> any computer of my LAN, It`s go out from the right ISP. But after a short nnca> time, is like if the rute was chached and it back to the same problem. nnca> (I´m getting paranoic :-P )

nnca> The Problem number two still happens when someone from outside trace an IP nnca> from mi LAN. Always the before complete jump is responded for the nnca> interface who correnspond to the other ISP.

nnca> Do you have an idea what can be the failure... or, can I call this a nnca> failure in my config?

nnca> THANKS VERY MUCH
nnca> Nicolas Fillon
nnca> Argentina

Quoted 45 lines
Quoted 45 lines

Hi nixo,

I suppose you don't preserve properly output address see my postting with script from 15th October this year :)
(append prohibit default:)

nnca> the scheme of my LAN is the next:

nnca> eth0 isp1 /32
nnca> eth1 lan de isp1 (LAN With public IP /24)
nnca> eth2 isp2 /32
nnca> eth3 lan de isp2 (LAN With public IP /26)

nnca> ip route add 200.47.x.x/24 dev eth0 src 200.47.4.x table 1 nnca> ip route add default via 200.47.4.x table 1

nnca> ip route add 200.80.32.x/26 dev eth2 src 200.80.32.x table 2 nnca> ip route add default via 200.80.32.x table 2

nnca> ip rule add from 200.47.4.x table 1
nnca> ip rule add from 200.80.32.x table 2

nnca> ip route add default scope global nexthop via 200.47.4.x dev eth0 nexthop nnca> via
nnca> 200.80.32.x dev eth2

nnca> ******

nnca> My problem is this: when I trace from the NETWORK of ISP1, sometimes the nnca> tracer go out from the gateway of ISP2 and vice versa

nnca> And when someone trace an IP from my LAN of ISP1, it`s showme as before nnca> complete the gateway from ISP2 y vice versa.

nnca> Mi question is: what is wrong in my config...??? What I need to put or is nnca> anything wrong with this config???.
nnca> THANKS VERY MUCH AND SORRY FOR MI HIGHSCHOOL ENGLISH.

Signature · 6 lines
Pozdrowienia,
 Robert                            mailto:[email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/