'Help with routing'
Witaj Nicolas,
W Twoim liœcie datowanym 24 paŸdziernika 2003 (05:26:05) mo¿na przeczytaæ:
NF> HI ROBERT:
NF> I apologise for mi ugly and diagrama thank you for the help. NF> This is the scheme of my network
[cut out]
NF> I`m using multipath default gateway because I want to balance the traffic NF> of my squid server (Is the proxy too). But I need the two networks go out NF> from its corresponding gateway.
Ok, I understand that the squid proxy server resides on your gateway and you only want to load balance a proxy, not the lans. So you have to distinguish between traffic from-to proxy and from your lans and apply different routing policies. I thing the best Idea is to use classical firewall marking (-j MARK --set-mark xx) depending on type of traffic and then use policy routing selecting different scenarios using
ip rule add prio <yyyy> fwmark <xx> table <bbb>
Should work. I use similar setup for limiting selected traffic to single interface only in multipath router.
NF> My problem is this: I can`t make everything that go out from one of the ISP NF> go out from the gateway that correspond to it. For example everything that NF> comes from ETH1 go out from ETH2.
NF> I think the correct thing is everything comes from ETH1 go out from ETH0
NF> ---------------------------------------------------------------------------- NF> ------
NF> Esta es mi Conf
NF> #removing old rules
NF> echo "removing old rules"
NF> ip rule del prio 50 table main
NF> ip rule del prio 201 from 200.47.4.98/32 table 201
NF> ip rule del prio 202 from 200.80.32.158/32 table 202
NF> ip rule del prio 221 table 221
NF> echo "flushing tables"
NF> ip route flush table 201
NF> ip route flush table 202
NF> ip route flush table 221
NF> echo "removing tables"
NF> ip route del table 201
NF> ip route del table 202
NF> ip route del table 221
NF> # setting new rules
NF> echo "Setting new routing rules"
NF> # main table w/o default gateway here
NF> ip rule add prio 50 table main
NF> ip route del default table main
NF> # identified routes here
NF> ip rule add prio 201 from 200.47.4.98/32 table 201
NF> ip rule add prio 202 from 200.80.32.158/32 table 202
NF> ip route add default via 200.47.4.97 dev eth0 src 200.47.4.98 proto static NF> table 201
NF> ip route append prohibit default table 201 metric 1 proto static NF> ip route add default via 200.80.32.157 dev eth2 src 200.80.32.158 proto NF> static table 202
NF> ip route append prohibit default table 202 metric 1 proto static NF> # mutipath
NF> ip rule add prio 221 table 221
NF> ip route add default table 221 proto static nexthop via 200.47.4.97 dev eth0 NF> weight 2 nexthop via
NF> 200.80.32.157 dev eth2 weight 3
NF> ip route flush cache
NF> exit
NF> THANKS VERY MUCH AND SORRY FOR MI HIGHSCHOOL ENGLISH
NF> ---------------------------------------------------------------------------- NF> ---------------------------------
NF> Nicolas Fillon
NF> Argentina
NF> ----- Original Message -----
NF> From: "Robert Kurjata" <[email protected]> NF> To: <[email protected]>
NF> Cc: <[email protected]>
NF> Sent: Thursday, October 23, 2003 4:13 AM NF> Subject: Re[2]: [LARTC] 'Help with routing'
Quoted 7 lines
Quoted 7 lines
Witaj nixo,
W Twoim liœcie datowanym 22 paŸdziernika 2003 (20:13:29) mo¿na przeczytaæ:
Seems like I didn't read your posting deeply enough. Before I can help I need to know some more details.
Quoted 8 lines
Quoted 8 lines
Why are you using multipath default gateway? If you just need to make a proper routing for two separate lans going through one machine, not mixing them you should never use it. It's usefull for NAT-ed lan inside, not for public IP's. Just create simple routes without multipath. eth0 <-> eth1 and eth2 <-> eth3.
nnca> Thank you very much for the solution, but I still have a problem and
NF> I
Quoted 1 line
Quoted 1 line
nnca> need help :) . The problem number one has been solved. When I trace
NF> from
Quoted 1 line
Quoted 1 line
nnca> any computer of my LAN, It`s go out from the right ISP. But after a
NF> short
Quoted 1 line
Quoted 1 line
nnca> time, is like if the rute was chached and it back to the same
NF> problem.
Quoted 3 lines
Quoted 3 lines
nnca> (I´m getting paranoic :-P )
nnca> The Problem number two still happens when someone from outside trace
NF> an IP
Quoted 64 lines
Quoted 64 lines
nnca> from mi LAN. Always the before complete jump is responded for the nnca> interface who correnspond to the other ISP.
nnca> Do you have an idea what can be the failure... or, can I call this a nnca> failure in my config?
nnca> THANKS VERY MUCH
nnca> Nicolas Fillon
nnca> ArgentinaQuoted 45 lines
Quoted 45 lines
Hi nixo,
I suppose you don't preserve properly output address see my postting with script from 15th October this year :)
(append prohibit default:)nnca> the scheme of my LAN is the next:
nnca> eth0 isp1 /32
nnca> eth1 lan de isp1 (LAN With public IP /24)
nnca> eth2 isp2 /32
nnca> eth3 lan de isp2 (LAN With public IP /26)nnca> ip route add 200.47.x.x/24 dev eth0 src 200.47.4.x table 1 nnca> ip route add default via 200.47.4.x table 1
nnca> ip route add 200.80.32.x/26 dev eth2 src 200.80.32.x table 2 nnca> ip route add default via 200.80.32.x table 2
nnca> ip rule add from 200.47.4.x table 1
nnca> ip rule add from 200.80.32.x table 2nnca> ip route add default scope global nexthop via 200.47.4.x dev eth0 nexthop nnca> via
nnca> 200.80.32.x dev eth2nnca> ******
nnca> My problem is this: when I trace from the NETWORK of ISP1, sometimes the nnca> tracer go out from the gateway of ISP2 and vice versa
nnca> And when someone trace an IP from my LAN of ISP1, it`s showme as before nnca> complete the gateway from ISP2 y vice versa.
nnca> Mi question is: what is wrong in my config...??? What I need to put or is nnca> anything wrong with this config???.
nnca> THANKS VERY MUCH AND SORRY FOR MI HIGHSCHOOL ENGLISH.Signature · 6 lines
Pozdrowienia, Robert mailto:[email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Signature · 6 lines
Pozdrowienia, Robert mailto:[email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/