Iptables connbytes
Hello,
Is it possible to mark packets from particular IP and if it downloads over 100Kbytes, then it enters in CBQ shaper 32kbit/s for example ? My kernel is 2.4.22.
If someone experimented with connection bytes patch please answer me.
Regards,
Todor Neshev
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 6 lines · Todor Neshev
Hello,
Is it possible to mark packets from particular IP and if it downloads over 100Kbytes, then it enters in CBQ shaper 32kbit/s for example ? My kernel is 2.4.22.
If someone experimented with connection bytes patch please answer me.
I did, and I am running it since I saw it first anounced on the list, and works really smooth ( ymmv ).
I declare a download class and after that I mark the packets like this :
$i -t mangle -A PREROUTING -m connbytes --connbytes 307200: -j MARK
--set-mark 3
and then :
$tc filter add dev $dev parent 1:0 protocol ip prio 1 handle 3 fw
classid 1:30
this allows me to do dynamic shaping, shaping that keeps track of medium/large downloads and takes action when those are detected.
hope it helps.
Quoted 6 lines
Regards,
Todor Neshev_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Signature · 9 lines
Cezar ATANASIU GMB Computers Departamentul Internet Tel/fax: +40 241 619222/673199 _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/