Skip to contentSkip to conversation

Limiting incoming and outgoing traffic

LARTC Luciano Lima 2 participants 2 messages Nov 4, 2003

lore
Share & tools
lore
#0 lore raw

Hi,

I've read the wondershaper.htb script and realise that it only uses one
device: ppp.

I have no experience with htb, but I thought that we could only shape outgoing traffic for an interface.
How could the script be written to limit incoming and outgoing traffic for the same interface ?

Thanks.

Luciano Lima

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 9 lines · Luciano Lima

Hi,

I've read the wondershaper.htb script and realise that it only uses one
device: ppp.

I have no experience with htb, but I thought that we could only shape outgoing traffic for an interface.
How could the script be written to limit incoming and outgoing traffic for the same interface ?

You said it right. You can only shape outgoing traffic, but you can limit incoming and outgoing traffic. So limiting is not shaping.

For instance, you can limit the incoming traffic from 1 hosts. Only limiting. You can not say (at least not easy), "if there is other bandwidth left, the host can use all of it, but it has throttle down to 40% if there is other traffc.". The latter is shaping and can only be done on outgoing traffic.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/