HTB on PPC (YellowDog) ?
I'm at a bit of a loss. I've followed the lartc.org howto and read the stuff on docum.org too, but still can't get HTB working on my PowerPC-based YellowDog linux system.
I've compiled a custom kernel:
Linux 2.4.20 #1 Tue Nov 11 11:52:48 GMT 2003 ppc ppc ppc GNU/Linux
The relevant options I used in my linux .config file are:
ONFIG_NET_SCHED=yCONFIG_NET_SCH_CBQ=yCONFIG_NET_SCH_HTB=yCONFIG_NET_SCH_CSZ=yCONFIG_NET_SCH_PRIO=yCONFIG_NET_SCH_RED=yCONFIG_NET_SCH_SFQ=yCONFIG_NET_SCH_TEQL=yCONFIG_NET_SCH_TBF=yCONFIG_NET_SCH_GRED=yCONFIG_NET_SCH_DSMARK=yCONFIG_NET_SCH_INGRESS=yCONFIG_NET_QOS=yCONFIG_NET_ESTIMATOR=yCONFIG_NET_CLS=yCONFIG_NET_CLS_TCINDEX=yCONFIG_NET_CLS_ROUTE4=yCONFIG_NET_CLS_ROUTE=yCONFIG_NET_CLS_FW=yCONFIG_NET_CLS_U32=yCONFIG_NET_CLS_RSVP=yCONFIG_NET_CLS_RSVP6=yCONFIG_NET_CLS_POLICE=y
I have rebooted with this kernel but don't seem to have HTB:
I have QOS enabled for sure:
[root@bsd3 iproute2]# grep qdisc_get_rtab /proc/ksyms c0158c58 qdisc_get_rtab_R3adce61c
But no HTB:
[root@bsd3 iproute2]# grep htb_qdisc_ops /proc/ksyms [root@bsd3 iproute2]#
When I try eg:
[root@bsd3 iproute2]# tc qdisc add dev eth0 root handle 1: htb default 15 Unknown qdisc "htb", hence option "default" is unparsable
What do I need to do?
Many thanks,
Nic.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 4 lines
When I try eg:
[root@bsd3 iproute2]# tc qdisc add dev eth0 root handle 1: htb default 15 Unknown qdisc "htb", hence option "default" is unparsable
This errror ussually means that you dont have HTB support in your user-space "tc" utility. Get the source of iproute2 and the HTB patches for "tc" and compile it yourself.
Signature · 5 lines
Damjan Georgievski jabberID: [email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/